Quote:Originally Posted by sspears It will be difficult to see.
If it were my display, I would set to 90. Sounds like a pretty coarse jump.
the help menu for dynamic range RGB states "when everything is correct, all of the boxes...
Quote:Originally Posted by sspears Which patterns are you asking about?
We have one pattern called clipping that servers a special purpose. In that pattern, the RGB boxes have YCbCr values that fall between 16-235 Y (16-240 CbCr)...
I have a question about the RGB clipping vs. YCbCr clipping patterns. What does each show and what do the YCbCr ones show that the RGB ones don't? Prior to using this disc, I've only seen RGB clipping patterns so the YCbCr ones are quite...
Quote:Originally Posted by dmunsil I kinda sat this out for a few days while I tried to digest this remark, and after due consideration I have to respectfully disagree. For the purposes of setting gamma, the key factor is that all...
Quote:Originally Posted by sabih786 I ended up returning the EH5300 for the ES6100, The wife likes the thinness and the slight rotating stand, I do notice however some flash lighting and clouding. Netflix loading times seem slower....
I have a question about evaluating motion resolution on my Samsung LED-LCD TV. I'd like to see what effect 'LED Motion Plus' has on moving picture resolution. Which patterns, in any, on this disc are best for that purpose?
Quote:Originally Posted by ConnecTEDDD
No, it's not attached.
For i1PRO1 the original base plate was required for reflectance measurements, or for running the X-Rite Diagnistics Software, but for emissive measurements, only an...
Quote:Originally Posted by zoyd yes, thanks for the unit catch, cd/m^2. I've measured a number of movies by setting the probe up to capture as much of the display as possible and average luminance measured this way is always well...
Quote:Originally Posted by zoyd I've measured the equal energy white patterns at ~30% energy load on my plasma with gamma @2.2 This is high enough to engage a moderate amount of limiting as peak white was reduced from 135 ftL to 115...
