Posts by GWCR

Welcome to the obsession! Sounds like you have some "stuff" already, now to figure out the room. If you have any drawings or pictures of the space, that would be helpful. What rooms are adjacent/above? Are you concerned about...

Quote:Originally Posted by Adoniram I'd personally like to see sound translation between 2 layers of drywall with GG versus 2 layers of the same drywall with silicone caulk, and again with latex caulk. GG's MSDS claims it's a latex...

150" screen...Is that diagonal for a 16:9, or wide for a 2.35:1? Also for a 12' wide room, it would be very tight for a couch and chair layout that you have on your drawing. Probably wouldn't be more than a foot to walk through that...

I'm in for the full disc as well. Will seed when it's out there.

Quote:Originally Posted by mijotter Small room and short ceilings. Don't want people making popcorn and grabbing some pop in the back to be in front of the projector. You say manual lens shift; if the projector is not 100% center...

The lens shift will only give you so much leeway. Not sure what the farthest distance would be. The center of my lens is 2" above the screen and a fraction to the left. I have enough play in the manual lens shift and v-area position...

Quote:Originally Posted by cr136124 58.4% so far.............please keep seeding guys!PC got rebooted. Stupid updates. Seeding again now!

Thanks for your service! This looks to be a great space. Love following these from start to finish. Subscribed!

Quote:Originally Posted by jautor The seat motors are not that big of a draw. It's the vacuum cleaner to get rid of all the popcorn that you probably don't to run during the train wreck sequence! Now, if you get everyone moving...

I would go with the Masonite door, and see if you can get the 1-3/4" version. They may have to order it, but the extra mass is worthwhile. I went back and forth on this decision too, and the exterior steel door just wouldn't look...