Posts by ko220

Hey, LenL and videobruce: After reading what you wrote about how you have a similar setup, I checked all my cables, then discovered that my Sony DVD player was bad - for any DVD that had more than 2 channels. I replaced it with another...

I'll go over to the DVD forum, maybe I'll find someplace to ask over there, I know you don't want this cluttered with off-topic stuff. Thanks.

This is off-topic, but I'm looking for a thread and was hoping maybe one of you could point me in the right direction, since you guys have always been so helpful with the DTVPal and the CM7000. I've hunted around, but didn't find...

Quote:Originally Posted by Pete-N2 One more thing. The diagnostics display area has a fixed length, so you might not be able to see all 14 entries. You can count the enteries or write down the ID's as you scroll through the...

Thanks, PeteN2! That's awesome. I'm going to look at my diagnostics screen to really see what's going on.

Quote:Originally Posted by trp2525 Have you looked at your diagnostics screen to see how far off each station's PSIP time is off from "real" time? Maybe you have a situation where the majority of your local stations' PSIP times are...

Quote:Originally Posted by ed_in_tx Did you set the time zone and DST mode? Yes, the time zone was set to Eastern and DST was On. It was very strange. I'll try again today and see if it works any better this time.

Quote:Originally Posted by mabuttra I would also give the clock 24 hours to settle in after the two reboots. It seems that people initially experience a larger amount of error right after the double reboot, but then it settles in...

Quote:Originally Posted by Pete-N2 Yes, you have done a factory reset. Did you do the 2 warm boots after the factory reset? After thought -- indoor or outdoor antenna? Quote:Originally Posted by trp2525 After you do the two...

Quote:Originally Posted by Pete-N2 First a couple of questions. On the remote press Menu- 3 -2 - 6, PgDn until you see "PSIP (5), state: 0x4404, elements: xx." How may elements? Have you done a factory reset since TVGOS...