New Posts  All Forums:

Posts by afineman

Evening All I just finished the Awake 13 episode season 1 (the only one according to what I read). Anyways, I enjoyed it and would recommend it, if you like the first episode you'll like the series. If this has been mentioned before,...
Greetings All I normally come here to get suggestions not to offer one:) I stumbled across Dollhouse and just finished both seasons, I actually enjoyed it. If you like the first episode then you'll enjoy the series. Sorry if this has...
Greetings All Being shut in because of the blizzard (I live in New Hampshire) I've binged all 13 chapters of House Of Cards. I (and my wife) have evolved to enjoy binge viewing so this binge is nothing new. I enjoyed the show, I look...
samuraibob Glad to hear all went well, and it is again working. That repair is exactly what I was going to try to guide you through, glad it all worked out in the end. I'm sure there will be plenty of opportunity (in the future) to...
ahar0 Welcome to the club (to bad it is for a similar problem), changing the connector (the one with the wires) won't be a good fix, both the male and female would have to be changed.The male pins in the connector soldered to the main...
samuraibob Are you in the USA, if so I would be willing to loan you the tools needed (cutter, solder and pencil point soldering iron). it doesn't make sense to buy for just 1 job (you just pay the couple bucks shipping back and...
samuraibob Your failure appears to be identical to my past failure. I am an electronics geek (having done the repair, it is simple for me), not knowing your back ground I will speak as though you have no experience (please don't be...
samuraibob Yes it appears to be the same sort of failure. Take it apart (many examples of how to in this thread), disconnect the LED connectors and look for where it is burned. Take some pictures (if burned of the male and female...
Stefan I finally repaired my HS 201 back in May, I didn't update because there appeared to be no interest. In the end, not only was the connector bad for the Green LED but there was a problem on the Blue as well. After I repaired both...
Karuton First there are no stupid questions I had stumbled upon my projectors ability to displaying a 3D image via HDMI by accident, because I had not read about this (3D via HDMI) I documented what the key (I believe) parts were in my...
New Posts  All Forums: