Originally Posted by kbarnes701
The sound is the relays clicking when the data stream is re-established. That is normal. Deano has given good advice - I'd just add some observations below:
It could be the start of the x008...
Originally Posted by deano86
At a minimum, remove your HDMI cable at both ends and reseat it. A poor connection can be the cause... maybe try using another HDMI input on your 3008. Do you bitstream from your Oppo or use PCM? ...
I have experienced the audio dropping out while watching Bu Rays twice in the last week with my 3008 and Oppo 93.
The video remains playing, though. Simply rewinding for a second and resuming queues the audio back. I hear a sound...
I followed your instructions for the D8000, received the upgrading message and have the updated logic version.
When I test chapter 38 on Sith on BD, I still see faint changes in the bars that go up and down.
Not sure if I...
Originally Posted by danielc1205
I believe I see similar thing.Mine is about 3,5" from the top,when image move from the bottom to top and from the top to bottom I see this line on bright backround (whites,blue sky etc.)I noticed...
Originally Posted by Audiofiler
I have a question about the d series panels and Plasma's in general.
Does anyone ever see a very, very faint grayish Line about 4" from the top of the screen? It can be seen with vertical panning...
Originally Posted by serial_carpens
Again, my 51d490 does NOT pop at all during normal use, PERIOD. It's not a matter of being able to detect it, as my eyes are VERY sensitive to such visual deviations. For example, I've never...
Having a new problem with 3D.
Right before the Disney intro in Tron and after that same intro, the D8000 flashes the picture all the way on and then off like 4-5 times in a moment or two. It's as if the HDMI handshake is...
Originally Posted by NovaKane
Install went smoothly for me. Settings were retained, thankfully, in MOVIE mode.
Did you notice gray-like blacks with the new few 1023? Seems like my blacks look a little lighter. The set still...