Posts by mobeer4don

Excellent suggestions. The wardsweb cabs are stunning. All I have to do is convince myself that it is my 2013 design-build project.

One of these days I'll get my AE TD15M drivers. Now I need some ideas for a cabinet design. I figure I'm not the only one looking at using a similar configuration so what other ideas are out there? A rectangular monkey coffin is easy...

Yes, put up a template up for sale and I'll be happy to order one.

Every time I start to get annoyed I walk into the garage and realize that he isn't as far behind as I am...3x custom JBL 2206 drivers, 2x eminence 2512, 2x JBL 125A (one to be refoamed), 2x B&C 10HPL51, 2x ewave boards, 2x 4pi XOs (1...

24 x 24 x 24 cubes are common design since it uses a 4x8 sheet of plywood or MDF efficiently Here's an example of a flat-pack that can save you some work...and they have some...

Every design is a compromise. How big can the sub be? Some can be the size of kitchen 'fridge so don't say any size unless you really mean it. How do you plan to power it? What are you using for a source? Typical 5.1-9.2 HTR? Are...

Keep in mind the woofer is tuned to the cabinet volume so this won't be as simple as cutting the box in two. Ignoring that, it depends on the crossover. Some PA speakers will run the woofer wide open so you can easily split the cab in...

Practice/test the stain and poly before you try it on the speakers. Getting a pro looking finish is not trivial. I've never tried the black dye myself. I did try gloss black lacquer spray paint on oak veneer plywood for a similar...

Quote:Originally Posted by Brad Horstkotte I'll see if I can get the box walls lined tonight, and do another close mic measurement (R13 I guess, since I have it on hand - I have polyfil as well, but that seems more appropriate if I...

Quote:Originally Posted by jumby181 i may not have much confidence to make the cuts but i can finish anything and make it look nice. Keep your eyes open for a beat up high-dollar sub on CL or similar. Some luck, elbow grease, and a...