Posts by waterfowl

Best to feed the pj a signal in it's native display resolution to have the least amount of lag. Also, are you running the video signal through a receiver or some other device first and then to the pj? That can add lag. A solution...

I contacted Onkyo regarding the fact I purchased an NR3007 less than 3 months ago from an authorized retailer and asked if an upgrade program would be available for a fee to trade in the receiver for the updated model, especially for...

Anthony, I've read the same but since I've never viewed the USA versions, can't give you an answer. I own both the Planet Earth and Life sets from BBC, both sets have a mixture of 1080P and 1080i. The narrator for the BBC sets is...

Anthony, Agreed on the screen being white and little gain employed. As a purist, I'm not a fan of creating "perceived" black levels and using the screen to modify what the pj is projecting. Calibration is done in the light path, but...

There actually is a small portion of the PJ market in which 1080P through VGA or BNC is the only option - those who use older CRT projectors that did not have HDMI and who have either not purchased an HDMI upgrade board or no such board...

Hi Anthony, The simple answer is yes, a computer video card can output 1920x1080 image. The problem is for copy protection purposes, 1080P blu ray from a VGA output is not supported. That was built into the spec early on to...

Agreed that the screen is a big factor in terms of reflective properties. Another item not mentioned here is while your pj may have near perfect calibration in it's light output, the screen can/will modify that light thus forcing color...

Agree with David. As long as you'll never need the higher lumen modes of the LG, the JVC at that price is your best image for dollar spent. The LG image is very similiar to JVC RS10, though not as dark on dark scenes. My brother...

Commoncents, Would recommend either the LG or the JVC over the Panasonic. I've viewed all these projectors, the image simply does not pop on the Panny the way it does on the LG and JVC. The black level of the LG really isn't that...

Anthony, JVC demonstrated this a couple of years ago using a couple of RS2's and a Sensio 3D processor. Everything has to be perfectly calibrated the same and projected at same points and of course the polarization of each projector...