New Posts  All Forums:

Posts by Erickson00

Quote: Originally Posted by NovaKane ^^^ When I first got my 51D8000 (last spring), I watched a lot of Fox News on that display. Consequently, when I'd pop in a movie, like the Lion King 3D, in certain scenes I would see the Fox logo...
Quote: Originally Posted by Phoenyx I'm looking at a few different subwoofers from HSU and SVS, however I'm always worried the sub might not go as low, or as loud, as I want it to (and to future proof my purchase). In terms of SVS,...
A couple weeks ago I started noticing that in certain scenes, my TV displays a jagged line of white pixels down the center of the screen. It is most noticeable against white or gray backgrounds, but is intermittent. It doesn't happen all...
Quote: Originally Posted by AtDaBeach They all buzz, but at varying levels. Maybe so, but I refuse to accept one problem fixed only to gain another. If they replace my panel, it needs to be quiet like the one I have now, or i will...
Quote: Originally Posted by casso maintenance company contacted me yet again. the first panel which was supposed to be replaced into my 64D8000 was broken during the delivery, and even while i had been without my tv for a few weeks at...
Quote: Originally Posted by mastiha Unfortunately, solutions like Powerbridge are not available in Australia. Anyone willing to unscrew the small plate covering where the power cable enters the screen and letting me know if it's...
Quote: Originally Posted by RyanA3 to all of my D8000 brothers and sisters. help me out with suggestions. do i keep my receiver or exchange for a bigger one. AVR-3312CI owner here. 125w x 7 room is 24x26. viewing area is...
Quote: Originally Posted by agogley No. Very few wall mounts have 3" clearance and the mounts Samsung sells for its own TVs have less than 1" in clearance (I think they are .68"). The manual (I just checked) doesn't have any clearance...
Quote: Originally Posted by agogley Yes, mine is wall mounted. And it's only got .55" clearance from the wall. I'll have to turn the TV on tonight. I haven't had it one for a few days now. I also checked the packing material. I...
Quote: Originally Posted by kriktsemaj99 If a receiver has a separate LFE low-pass filter setting, it should always be set to 120Hz or you could be losing information from the LFE channel (this comes up a lot in the Audyssey thread,...
New Posts  All Forums: