Posts by ConnecTEDDD

Quote:Originally Posted by PlasmaPZ80U As far as BD calibration disks go (not including free ones), I currently have just the Disney WOW BD and Spears & Munsil HD Benchmark Blu-Ray 2nd Edition. If I was to get a third, which would...

Quote:Originally Posted by e08  Now that is one impressive collection! Makes my set of 3 disks seems pitiful... Gotta start somewhere.Quote:Originally Posted by sspears That's a nice collection. Thank you, I forgot to...

Quote:Originally Posted by robbyrockets Is there an exact number as too how low my Display3 Pro will go because when im doing on/off contrast ratio it comes back 0.000 with a final reading of 77, 567 on my VT60 plasma. From Tom's...

After Receiving Today my copy of Spears & Munsil HD Benchmark Blu-Ray 2nd Edition Disk... (Thank you Buzz for that) I can confirm that it has the most advanced tests (static or motion patterns) available of any other Calibration Disk of...

Quote:Originally Posted by 1forsnow hmmm ok, fair enough. Even if there are larger xyY differences between the samples, i still don't think the differences will be large enough to make any sort of visual difference with content....

I will come back with more data's when I will have the time. C6's response is not the same with 1 Sample measuring samething with 10cdm/2 vs. 20 cd/m2 vs. 90 cd/m2 etc.... The differencies are larger in xyY. Ok it small difference for...

Quote:Originally Posted by sillysally ^^^^^ On the charts it sure looks a lot better than the 17^3 (4913) profile I just ran using Lightspace. btw your 4 hour time using your meters is pretty good. ss He used C6 with 1 Sample...

Quote:Originally Posted by cbragwel Is there anywhere that states which displays have Direct Display control and Autocalibration support? Anyone know if the Samsung F8500 is one such display? Hardware Support Panasonic LED/Plasma,...

Light Illusion found an issue with JETI's SDK, which JETI have updated today with v3.2.2 of SDK 's (14 May 2013), and the new JETI's SDK if fully implemented in the latest version of LightSpace CMS that is released today also.

Quote:Originally Posted by Kilgore Quote:Originally Posted by PlasmaPZ80U does it matter whether 75% stim or 100% stim patterns are used when creating the profile? I know CM5 defaults to 75% stim I don't think it matters which...