Posts by BCRose

Thanks for the info, I was just curious because I purchased an expensive Monster cable that may have been very old stock and wanted to return it because it did not work for Blu-Ray. They told me it was the best cable I could...

Quote: Originally Posted by cbhpi Rdgrimes deserves a round of applause on this one. He correctly diagnosed the problem early on with a minimum amount of information. Thanks to you both. Just wanted to mention I stopped at Wal-Mart...

Quote: Originally Posted by cbhpi When you hooked the blu-ray directly into the projector, did you remember to tell your projector to get the signal from the hdmi connector into which you plugged the HDMI cable leading from the blu-ray...

Quote: Originally Posted by cbhpi When you hooked blu-ray directly to projector, did you use the same HDMI cable that you used to connect blu-ray directly to your old tv? OK, Just hooked up the Blu-Ray player on old tv using the...

Quote: Originally Posted by cbhpi When you hooked blu-ray directly to projector, did you use the same HDMI cable that you used to connect blu-ray directly to your old tv? No My brain is confused on all this and never even thought...

Quote: Originally Posted by cbhpi Still no luck? Did you ever connect straight from your blu-ray device to your projector? No luck. Must be the cable. I take the blu ray player to my regular TV and hook it up direct and it works...

Quote: Originally Posted by Osirus23 Version is not relevant to cables, just the devices. For this reason HDMI.org recently banned the use of version info in cable marketing/labeling. The only real cable variants you have to 'worry'...

How would I go about finding out what version an HDMI cable is? Thanks

Quote: Originally Posted by rdgrimes Sounds like a bad HDMI connection. Try a different cable. I know this is not really related to the Yamaha but how does one find out what version HDMI the cable is?

Quote: Originally Posted by rdgrimes A wrong assumption. The sat box does not require as much HDMI bandwidth as the BD player, so a bad cable might work fine for the sat box but not for the BD player. Use the cable that was connecting...