Quote:Originally Posted by Neurorad I searched HD's website and didn't see ProTrak. I will look at the store. Thanks.
I'm assuming it's this, and the picture is incorrect.
Quote:Originally Posted by JRock3x8
I don't understand why they used plywood where the projector goes instead of drywall...
So you don't have to worry about hitting a stud when mounting the projector. You can screw into any area...
Progress! 95% finished my joist muffler for my HVAC supply into the theater (based on the SIM from John at The Soundproofing Co, but tweaked to my needs). Also, got the first sheet of drywall on the ceiling which felt pretty...
Quote:Originally Posted by JRock3x8 ok i need to process this - not making sense immediately because it looks like the riser is only 2" or so and I'm not following how that gets your back row clearance to see over the front...
Just a thought about your rear seats; you can build a smaller riser on top of your existing riser that fits completely under your seats, rather than using those little legs. That way, when standing you have some more head room but the...
Quote:Originally Posted by JRock3x8 My intent was to do 2x4's 1" from concrete plus whisper clips plus hat track plus 5/8 drywall plus green glue plus 5/8 drywall.
Still trying to figure out ventilation and wiring.
There's no need...
Quote:Originally Posted by JRock3x8 I confess that I get really embarassed when the answers to my questions keep pointing back to sites you've already told me to read.
This is the answer to my ventilation...
Quote:Originally Posted by JRock3x8 Ok so normally if you were to install soffits you would screw or nail them to existing studs but if you're using whisper clips and furring strips what are you securing the soffits to?
The hat...
