Posts by snoop832

Do you have to calibrate the display for smarthub? And if you do how do you do it.... Thanks -A

Here are some pics... I think this is the best I will get it for now, unless you think I need more tweaking, just say so... Thank u guy's for all your help...

Quote: Originally Posted by Chad B You need to keep contrast set high... In the mid 90's is best. Lower causes the 10 pt to mistrack and have excessive interaction. I have it set to 95... That should be good enough I assume..

Quote: Originally Posted by buzzard767 Sure, except it's %, not IRE. For instance, measure 70%, adjust with 60% control, measure 60%, adjust with 50% control, etc. Simple, and in the case of Samsungs, sometimes required to finally get...

Can you take a continuous measurement on 1 Ire while make an adjustment in 10 point?

I am currently trying to adjust the 10 point on the samsung and every time I adjust one point the others change and I am sick and tired of going through the 10 point test every time an adjustment is made... Is there any other easier way...

What kind of light meter can I use to balance the TV with? Thanks -A

Quote: Originally Posted by sotti medium dark you're probably looking at 2.3-2.35ish, gamma is really hard to be specific about unless you have specific (as measured by an instrument) for the ambient light and surround color and...

Hi Everyone, Quick question... When adjusting the gamma or brightness does it affect the color at all? Does the color shift or color level change? Do I have to recalibrate the TV after making any adjustments to the gamma and...

Quote: Originally Posted by fsi Cool.Do the 2 point adjustment & once you're as close as you can get with that,tighten up with the 10 point adjustment. Thank you.... That helped a lot!! -A