or Connect
New Posts  All Forums:

Posts by sagarmc0040

Thank you for the reply Jim. Yeah, this is what audyssey returned!! I will try your suggestions and check again.
Hi Guys, I need help in bass managment for JBL ES250p subwoofer. I have the following speakers connected to Onkyo 609 receiver. Center Speaker - JBL ES 25C - Frequency Response: 80Hz – 40kHz (–6dB) and Crossover Frequencies 3000Hz – 24dB/octave; 12000Hz – 18dB/octave Fronts JBL ES 20 - Frequency Response: 60Hz – 40kHz (-3dB) and Crossover Frequencies: 3300Hz – 24dB/octave; 12000Hz – 18dB/octave SurroundS - JBL ES 10 - Frequency Response: 65Hz – 40kHz (-3dB) and Crossover...
Hi Guys, I need help in bass managment for JBL ES250p subwoofer. I have the following speakers connected to Onkyo 609 receiver. Center Speaker - JBL ES 25C - Frequency Response: 80Hz – 40kHz (–6dB) and Crossover Frequencies 3000Hz – 24dB/octave; 12000Hz – 18dB/octave Fronts JBL ES 20 - Frequency Response: 60Hz – 40kHz (-3dB) and Crossover Frequencies: 3300Hz – 24dB/octave; 12000Hz – 18dB/octave SurroundS - JBL ES 10 - Frequency Response: 65Hz – 40kHz (-3dB) and...
Hi All, I have very limited knowledge on AV receivers and speakers. After reading some posts and reviews, I have decided to go with below Home Theater configuration. AV Receiver: Denon 1912 or Yamaha RX V671 Front: Polk RTI A3 Center: Polk CSI A4 Rear: Polk FXi A4 Sub: DSW PRO 550 or Velodyne Impact 10 Is my above configuration is good enough for Music and Movies ? My drawing room size is about 22X15. Which one is best for my config, Velodyne Impact 10 or DSW PRO 550 ...
New Posts  All Forums: