Posts by ndaa75

Quote:Originally Posted by youngsyp Hi, Yes that's right, it's a UK 55VT30. CMS settings are:   This is the report for W/B:   And this for gamut:   I compromised with the CMS calibration to strike a balance...

Quote:Originally Posted by youngsyp Hi, Would be great to change the picture mode labels but unfortunately I need to retain the factory PIN to use ControlCAL. Out of interest, what patterns are you using to calibrate the CMS? Ive...

Quote:Originally Posted by airscapes Wanted to give this thread a bump. I finally got around to burning the disk and taking a look at it, VERY Very NICE! Thanks so much for taking the time to put this together for every one! No...

Quote:Originally Posted by Wouter73 \ If the errors in a chart are greater, but still undetectable with the human eye, who cares.... +1

Quote:Originally Posted by fluxo [snip] I've just seen the Chad B pattern set :--) Heres an intereting article re pattern types and sizes. http://www.tlvexp.ca/2013/05/apl-of-the-covenant-a-transmitter-for-talking-to-plasma-tv-gods/

Quote:Originally Posted by Iron Mike obvious question if your eyes see different things than what the software reports (which reads data from your meter): what meter are you using, and if it is a colorimeter, are you profiling to a...

Quote:Originally Posted by zoyd gamma has a more measurable variability but this is a matter of taste for the shifts we measured so yes, pick the ones that you like. Gamma and plasmas. Mmmmmm. Ive learnt to set your target gamma...

Quote:Originally Posted by prsut Regarding to APL patterns you may read article from Master Of All Calibrators here Great article.

Quote:Originally Posted by IcetomLT Did you check uniformity of screen? My TX-P50VT30E have some green blobs on screen which you can see in some specific scenes. May be this is your case too? The easiest way to spot them- to use ...

Ill post some pics a little later