Posts by EtherMagic

Quote:Originally Posted by ScoHo Does anyone ever hear a buzzing sound coming from their MonsterVision glasses? Very subtle, and I only notice it during silent scenes. This thread talks all about the buzzing sound you are...

Quote:Originally Posted by KMR Can an RF 3D emitter be plugged directly into the HW30? Or would one need to make an IR -> RF (or vice versa) adapter? Here's a quote I found that may help as far as modifying as to what you are...

Just tonight I connected my monster glasses to my Sony HW30 projector, and while the 3D is amazing, I am seeing flicker/low shudder speeds to the point of being distracted at times. Does the position of the Emitter have anything to do...

Quote:Originally Posted by MadMyers The IR port on the HW30 is for IR "input". It receives commands from your remote if you have the appropriate gadgets. It's not for "outputting" IR for 3D or any other feature. There you go, I...

Quote:Originally Posted by NNate I started noticing this about a month ago... I'm seeing a yellow haze/discoloration mostly along the right side of the projected image. Has anyone else experienced this? It's most noticeable on a...

Quote:Originally Posted by KMR Can an RF 3D emitter be plugged directly into the HW30? Or would one need to make an IR -> RF (or vice versa) adapter? The Hw30 does have an IR port (the port says IR on it and my MonsterVision...

Quote:Originally Posted by mark haflich No professional mounter would EVER use a level on the projector. You hang the screen and put a level on top of the frame to make sure it is horizontally level. That's it. Put the level...

Quote:Originally Posted by tjsbuyer Something sounds off on the mounting. Is it ceiling or table mounted. In either case is it square on all axis to the screen (pitch, yaw, roll). Use a level if possible. Also check with a level...

Quick question... My screen is perfectly level, but my projector is off!!! The bottom part of the image is perfectly straight, but the top part of the picture is off by like an inch! Basically the Picture is NOT a perfect "BOX" in...

Quote:Originally Posted by MadMyers In short 1) Power outlet nearby 2) One or Two HDMI cables, depending on your setup 3) Component Cables, if you are using that source 4) VGA Cable, if you are using that source 5) Cat X cable for...