or Connect
New Posts  All Forums:

Posts by mrkris82

I have a sharp XR30X which has a DVI-D port for the hi def port. I have been running an HDMI cable from the directv receiver to a HDMI to DVI adapter, which connects to the projector. Until now, this has worked perfectly fine. All of the sudden,it no longer is showing any images I attempt to display through the DVI port. I have tested other working devices and receivers and I get the same result. With that being said, I have narrowed it down to the adapter ($3 to replace)...
I just moved and think my settings on either the projector, DirecTV receiver or both got reset because I am not having luck with getting the directv image to reflect the entire size of my 92" projector screen. I dont have the projector mounted yet, but when I moved it around in the air to find the correct placement, the best I can do is get the height filled, but I have about 12" of no picture on the left and right side for some reason. Any idea what I need to adjust...
New Posts  All Forums: