New Posts  All Forums:

Posts by wallmountworld

WE do have a TV mount that is made for installing over a fireplace. It will support flat panels up to 110 lbs. Depending on the mantel depth it can lower as much as 30" when the mantel is less than 5" wide. For example if the mantel...
There is a mount made specifically for use over the fireplace that will lower down up to 30" if the mantel depth is 5 inches or less. When not in use you can raise it back up to the home position. You must bare in mind how much heat may...
There is for sure a price difference between motorized ceiling lifts and manual for sure. For automation you will break out the old pocket book and have to dig deep.
Have you looked into a recessed wall mount box. Chief makes an in-wall box that will have the back of your TV just .6" from the wall. It is a full motion mount that can extend out but, there is not a mount made that we are aware of that...
Whenever we do installs we do not mount a pull out mount without hitting some studs. Definitely would not trust a toggle bolt thru sheet rock for support. If you can cutout and install some 2x4 studs anchoring them securely into the...
There is a fireplace mount made now that will lower and raise 30 inches if the depth of the mantel is around 4". It is made for mounting above the fireplace mantel and at times it could be mounted in a room the has a mid level beam. The...
Anytime you are mounting to two wood studs you bracket is more stable. Even though your TV may not weigh much make sure you screw the lag bolts that come with you mount into the center of the wood stud. Also mounting to wood studs is...
New Posts  All Forums: