New Posts  All Forums:

Posts by BeeMan458

Quote:Originally Posted by coasterguy I don't have a budget. Yes, I read that and a rational conversation needs a budget. What are your expectations out of this, purchase to fit under a table, subwoofer? If one doesn't want to be...
Quote:Originally Posted by coasterguy Thanks. No budget at this point. One can't have a rational "recommend" a subwoofer conversation without a budget. You've already limited yourself with your original post and subwoofers are the...
I thought the F25 was just recently released.
Quote:Originally Posted by caloyzki Which equaluzer you guys prefer while watching movies? Flat. Depth or punch? Ours is set to flat as the subwoofer system has been calibrated using DSPeaker, Anti-Mode and Audyssey, MultEQ XT.
Quote:Originally Posted by sivadselim Now you are truly affirming that you don't know what we're talking about, here. And well it shouldn't as my comment was to something you commented about when you posted: Quote:Right. So why...
Quote:Originally Posted by sivadselim Right. So why would someone who goes to a a lot of trouble to measure, EQ and calibrate their setup then feel that there is a need to unnecessarily truncate the LFE channel? It makes no sense at...
Quote:Originally Posted by sivadselim Maybe you have some REW measurements you can show us to support these assertions. There's no assertions being made. You know I don't save anything. I make many, many measurements, confirm what...
Regarding, DonH50's above comment, that's what happens when folks try to base perception on emotion rather then taking the time to use room measurements in which to integrate their subwoofer system into their room's acoustics. And FWIW,...
Quote:Originally Posted by jbrown15 A single XS30 could probably damage your hearing in a 2100cubic/ft room, it's also not a sealed room. It has a 6ft wide opening into another 800cubic/ft area plus a 8ft long hallway until you get...
Not to mention the conflicts created in a room between 80Hz and 120Hz. There's many reasons to LPF >80Hz as nulls and locatability are two very good reasons. Personally, based on REW measurements, we use asymmetrical LPF settings. ...
New Posts  All Forums: