Posts by chocpretz

Ok so today I isolated where the rattling is coming from. Seems to be the top front. Whenever I sit on the top, rattling is reduced but not eliminated. So instead of drilling in screws in an attempt to hold the mystery panel down, I cut...

The image uploader doesn't like my pictures, so here's an Imgur Link. Sorry there aren't pictures for each step of the way. Also, one thing I made sure of was to sand down all of the panels so they were level when glueing the last side...

The image uploader doesn't like my pictures, so here's an Imgur Link. Sorry there aren't pictures for each step of the way. Also, one thing I made sure of was to sand down all of the panels so they were level when glueing the last side...

Yeah ill try to upload some pics in a little. But i basically bought a 15'' baffle off amazon and glued it to my existing baffle as a baffle doubler and it sounds pretty solid to me. Screwed the driver down and everything looks good in...

Ok i think i discovered the main problem. After finally getting the driver mounted correctly, something inside the box is rattling pretty badly. I can't find anything by reaching my hand through the mouth so how would i go about cutting...

Quote:Originally Posted by Bill Fitzmaurice The second baffle should have been screwed and glued to the first.Yeah that's what I figured, but I discovered this problem after the entire sub was completed.

Everything internally seems to be ok. It's just the driver mounting and baffle that are giving me problems.

No voids. It's barley audible but i think it has to do with not being able to tighten everything down.

Ive been trying to work out some kinks with my tuba ht subwoofer. I have a double baffle installed because the cone was hitting plywood. Whenever I try to play anything 30hz or lower, the driver and double baffle just shake like crazy...

I've run into a minor problem during the Tuba HT build. While constructing the baffle, my screw holes to mount the driver were incorrectly aligned and the wood started to split towards the underside where i was drilling. This is my...