Posts by yuriygeorge

Hi, Please help. Is it possible to achieve low audio/video sync delay with this setup using Livestream for Producers, or Procaster, or FMLE: 1) Connect 4 SD AV Cameras to a cheap Video Switcher such as the RDL RU-AVX4...

Hey, I opened another thread for this in: http://www.avsforum.com/t/1450189/denon-1713-zone-2-same-source-airplay I have the Denon 1713 and I was trying to work off what you said, but I think I'm doing something wrong. The Denon 1713...

I think the problem was because I was plugging the EMU 1/4' L+R Out to the standard RCA Red+white into the denon. I think these EMU 1/4' out ports are not meant to be plugged into the Denon receiver. So, Denon was getting an...

I see a lot of people talking about using Zone 2 to play audio from multiple sources. But, I'm looking to play audio from the same source to 2 different rooms. I have my 2 front tower speakers (Klipsch RF 82 II's) and subwoofer (Sunfire...

Quote:Originally Posted by jdsmoothie At this point .. if the 1713 is dead you'll need to replace it regardless. Go from there. Well, I can get a free warranty repair a 2nd time, but I don't want to bring it back again, plug it...

Quote:Originally Posted by Secret Squirrel No, You will never need 150watts rms for those speakers. Most of the time they are only using a couple of watts. Having a 600watt amplifier will not make them louder. You would either blow...

Quote:Originally Posted by jdsmoothie On average those speakers are drawing only 1-2W/CH let alone anywhere near their maximum capacity. Either the AVR is defective or that EMU is causing the issue. I think it's probably the AVR...

This is what I don't understand though. the 1713 specs say 80 Watts per channel. But the speakers say "POWER HANDLING: 150W RMS / 600W Peak" So, they should be able to handle 150 Watts... right? Does that mean that with the 80 Watts per...

I bought a Denon 1713 for my 2 front Klipsch RF 82 II's and an Sunfire SDS 12 subwoofer. Here are the specs: RF 82s - http://www.klipsch.com/rf-82-ii-floorstanding-speaker Sunfire SDS -...

Quote:Originally Posted by Mupi Note that the KLF-20 is a discontinued older model. They use 2 10" woofers and they are also very heavy (86.5 lb each). They will go lower than the RF-82 II. But if you are getting the RF-82 II for...