or Connect
New Posts  All Forums:

Posts by srtblp

Thanks for your replies. It appears that the unit is sensitive to voltage levels not as low as I would have thought. I found my power conditioner can be set at 110, 120, 130 v setting respectively. It had been on the 110v setting and all my gear was working well on it until the R-972 came along. When I would attempt to turn the unit on the relay would click and then drop out, and I would have to push standby again to make it hold. Once I changed the voltage to 120 v...
Has anyone experienced distortion with the R-972? I am on my second unit because of it. There was severe cracking, and banging sounds coming from the speakers. It would do it in stereo, room, stadium and Mch stereo so badly that i thought it would destroy my speakers. This was with the volume at near muted levels also so it was not an over driven speaker condition. It did this with any source, cable type and different speaker configurations and brands. All the other sound...
New Posts  All Forums: