2_ STABLE; FULL/HPF/LPF CROSSOVER SWITCH; VARIABLE HIGH-PASS: 40 HZ - 250 HZ; VARIABLE LOW-PASS: 40 HZ - 250 HZ; VARIABLE INPUT LEVEL (GAIN) CONTROL: 6V - 200MV; BASS BOOST SELECTOR: 0 - +18 DB; THERMAL/OVERLOAD/SHORT CIRCUIT PROTECTION; SOFT TURN ON/OFF; POWER & PROTECTION LED INDICATOR; LOW LEVEL RCA INPUT: 10K_; LINE LEVEL RCA OUTPUT; FREQ RESP: 15 HZ - 30 KHZ; SIGNAL-TO-NOISE RATIO: >...
BLACK NON-PRESSED PAPER CONE SPECIALLY TREATED FOAM EDGE SUSPENSION; STAMPED STEEL BASKET WITH HEX KEY INPUT TERMINAL; BUMPED VENTED MOTOR STRUCTURE; CUSTOM DESIGNED RUBBER MAGNET BOOT; DUAL 4_ NOMINAL IMP; 12"; 1,600W MAX; 80 + 80 OZ HEAVY DOUBLE STACKED MAGNET STRUCTURE; 2" DUAL LAYER HIGH TEMPERATURE KAPTON(R) VOICE COIL; SPL: 84 DB; MOUNTING DEPTH: 5.76"
The SpeakerCraft IRC-2.0 is an infrared receiver that allows you to use your A/V components with a handheld remote, even though the devices may be installed out of the line of sight. Coupled with a regulated power supply, mount the receiver on a wall, cabinet, or any flat surface and control your A/V equipment located in other rooms or enclosures.
Ambient Noise Suppressor Connects via 4 stripped conductor wires System status and I/R activity LEDs Mini unit designed to mount flush with a cabinet or wall Requires regulated power supply, terminator block and emitters
STANDARD SIZE FITS OEM LOCATIONS HIGH QUALITY INJECTION CONE; NON-FATIGUING BUTYL RUBBER SURROUND; GLOSSY BLACK COATED STEEL BASKET; IMP: 4_; INCLUDES CUSTOM WIRE-MESH GRILLS, WIRES & INSTALLATION HARDWARE; 6.5"; 2" TITANIUM CONE MIDRANGE; 15 OZ MAGNET STRUCTURE; 1" HIGH TEMPERATURE ALUMINUM VOICE COIL; SUPER PIEZO TWEETER; 100W RMS; 200W MAX; FREQ RESP: 65 HZ-20 KHZ;...
Ambient Noise Suppressor Connects via quad 3.5mm mini connector System status and I/R activity LEDs Mini unit designed to mount to the surface of a cabinet, TV set or wall Requires regulated power supply, terminator block and emitters
Central control unit for IR systems Drives standard emitters or high powered blasters Quad 3.5mm mini-phone type jack for connection to IR receivers EZ-Connect terminal block, power jack, 5-24V DC status jack, DIP switch Requires power supply (ELT05100 or ELT05200)