Receivers & Amplifiers
The PRE32 is an upgradable audiophile pre-amplifier designed to match the Primare A34.2 and all Primare power amplifiers. It features the comprehensive OLED display and control parameters established by the EISA award-winning I32 integrated amplifier. The PRE32 is housed in a heavy gauge alloy steel chassis, and incorporates two pairs (L/R) of low-noise balanced XLR inputs and 4 pairs of RCA...
Operator's manual. Includes Operation, Manual Recording, Timer recording, Updating Preprogrammed Station/Frequency, Selection of NAVTEX Station and Message, reception by External Receiver, Replacing the Recording paper, Maintenance, Troubleshooting, Installation, Principles of Facsimile and NAVTEX Systems, Maps and Lists, Drawings and Schematic Diagrams.
The BBE FJB-200X Phono Preamp converts an RIAA turntable signal into line level so you can play your vinyl straight through your stereo, mixer, or computer sound card. The BBE preamp has stereo RCA I/O, 1/4" TRS out, and a grounding post for 60-cycle hum elimination. Works with magnetic phono cartridges.
Mackie's Rotopod I/O Bracket for the Onyx 1640i Firewire Mixer allows you to adjust the I/O section of your Onyx 1640i mixer so the connections are all visible on the face of the mixer for easy access. will face in the same direction as the console. Onyx 1640i uses 17 spaces in a standard equipment rack with the bracket attached.
The Mackie 32-4 Nylon Dust Cover is a snug fit case designed to protect your mixer against moisture, dust, volcanic ash and other unexpected toxic airborne particles. The cover is made from 1200 Denier ballistic nylon that won't tear, or shred.
The Mackie 1604 VLZ Pro Nylon Dust Cover is a snug fit case designed to protect your mixer against moisture, dust, volcanic ash and other unexpected toxic airborne particles. The cover is made from 1200 Denier ballistic nylon that won't tear or shred.
The Rotopod I/O Bracket from Mackie is a bracket that allows you to adjust the Rotopod I/O section of your Onyx 1640i mixer so that the connections will face in the same direction as the console. When used with this bracket, the Onyx 1640i will take up 17 spaces in a standard equipment rack.