or Connect
AVS › Reviews › Receivers & Amplifiers

Receivers & Amplifiers

Manufacturer

RDL STM-3 Mic Preamplifier Flexible, Low Noise, High Gain, Two Balanced or Unbalanced Outputs - Power Supply Included

RDL STM-3 Mic Preamplifier Flexible, Low Noise, High Gain, Two Balanced or Unbalanced Outputs - Power Supply Included

The STM3 is a quality lownoise microphone preamplifier designed for use in surveillance, commercial sound, broadcast, and recording where higher than normal gain is required. The STM3 is very flexible, with gain adjustment from 45 to 75 dB, two balanced or unbalanced outputs, and available phantom supply input. Its lowdistortion and lownoise performance make it the best choice, even when larger...

Kramer Electronics PT-120 Computer Graphics Video Over Twisted Pair Receiver

Kramer Electronics PT-120 Computer Graphics Video Over Twisted Pair Receiver

The Kramer Electronics PT-120 Receiver is a component of an array of products intended to extend the reach of computer video cables, dramatically increasing the distance between source and monitor. This allows a user to cleanly extend their studio, video and security applications beyond the short cabling that restricts the spacing of devices. Using a compatible transmitter, the PT-120 can...

RDL STM-LDA3 Mic Preamplifier Studio Quality with Phantom Three Distributed Line Level Outputs - Power Supply Included

RDL STM-LDA3 Mic Preamplifier Studio Quality with Phantom Three Distributed Line Level Outputs - Power Supply Included

The STMLDA3 is designed for use in quality commercial sound, broadcast and recording applications. The 1.2 k balanced input accepts a wide variety of microphone input levels without loading professional lowimpedance microphones. A multiturn gain trimmer allows precise output level adjustment. The output signal is available on three separate balanced line level outputs. Each output may be...

RDL ST-PH1 Stereo Phono Preamplifier - Power Supply Included

RDL ST-PH1 Stereo Phono Preamplifier - Power Supply Included

The STPH1 is a stereophonic phono preamplifier. Each of the two channel circuits is identical. The STPH1 has standard 47 k impedance unbalanced phono cartridge inputs. Equalization follows the RIAA curve. Each output is capable of driving balanced or unbalanced, high or low impedance loads. RDLs SupplyFlex power input configuration is included in the STPH1. The power supply input may be fed...

RDL STA-1 Preamplifier 2 Identical Circuits Stereo or Dual Mono Operation - Power Supply Included

RDL STA-1 Preamplifier 2 Identical Circuits Stereo or Dual Mono Operation - Power Supply Included

The STA1 is a dual-channel line-level preamplifier with bridging inputs, adjustable gain or loss, and lowimpedance outputs. Each of the two identical circuits is both an electronic line transformer and a line amplifier. Hook up the STA1 just like a pair of audio transformers with gain. True dc amplifiers produce unsurpassed audio clarity, high commonmode rejection, ultralow distortion and low...

Kramer Electronics PT-572+ HDMI Over Twisted Pair Receiver

Kramer Electronics PT-572+ HDMI Over Twisted Pair Receiver

The Kramer Electronics HDMI over Twisted Pair Receiver is used to receive HDMI signals sent over a twisted pair cable. Supporting a maximum data rate of up to 1.65Gbps, the receiver supports HDMI v1.4 with 3D, Deep Color, x.v.Color, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD and 3D Pass-through.Converting the twisted pair cable signal back to DVI, the receiver offers a maximum range...

Kramer Electronics 1:2 Computer Graphics Video Line and Distribution Amplifier

Kramer Electronics 1:2 Computer Graphics Video Line and Distribution Amplifier

The VP-200xl is a high-performance line and distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It provides controls to compensate for signal losses inherent in long cable runs.

AVS › Reviews › Receivers & Amplifiers