or Connect
AVS › Reviews › Receivers & Amplifiers

Receivers & Amplifiers

Manufacturer

Kramer Electronics PT-120 Computer Graphics Video Over Twisted Pair Receiver

Kramer Electronics PT-120 Computer Graphics Video Over Twisted Pair Receiver

The Kramer Electronics PT-120 Receiver is a component of an array of products intended to extend the reach of computer video cables, dramatically increasing the distance between source and monitor. This allows a user to cleanly extend their studio, video and security applications beyond the short cabling that restricts the spacing of devices. Using a compatible transmitter, the PT-120 can...

Speakercraft IRC-2.0 Surface Mount Mini IR Receiver

Speakercraft IRC-2.0 Surface Mount Mini IR Receiver

The SpeakerCraft IRC-2.0 is an infrared receiver that allows you to use your A/V components with a handheld remote, even though the devices may be installed out of the line of sight. Coupled with a regulated power supply, mount the receiver on a wall, cabinet, or any flat surface and control your A/V equipment located in other rooms or enclosures.

Speakercraft IRC-1.1 Flush Mount Mini IR Receiver

Speakercraft IRC-1.1 Flush Mount Mini IR Receiver

Ambient Noise Suppressor Connects via 4 stripped conductor wires System status and I/R activity LEDs Mini unit designed to mount flush with a cabinet or wall Requires regulated power supply, terminator block and emitters

SPEAKERCRAFT ELT01200BK Surface Mount Mini I/R Receiver with Phone Connector in Black

SPEAKERCRAFT ELT01200BK Surface Mount Mini I/R Receiver with Phone Connector in Black

Ambient Noise Suppressor Connects via quad 3.5mm mini connector System status and I/R activity LEDs Mini unit designed to mount to the surface of a cabinet, TV set or wall Requires regulated power supply, terminator block and emitters

SPEAKERCRAFT ELT02100 Amplified Terminator Unit

SPEAKERCRAFT ELT02100 Amplified Terminator Unit

Central control unit for IR systems Drives standard emitters or high powered blasters Quad 3.5mm mini-phone type jack for connection to IR receivers EZ-Connect terminal block, power jack, 5-24V DC status jack, DIP switch Requires power supply (ELT05100 or ELT05200)

Kramer Electronics PT-572+ HDMI Over Twisted Pair Receiver

Kramer Electronics PT-572+ HDMI Over Twisted Pair Receiver

The Kramer Electronics HDMI over Twisted Pair Receiver is used to receive HDMI signals sent over a twisted pair cable. Supporting a maximum data rate of up to 1.65Gbps, the receiver supports HDMI v1.4 with 3D, Deep Color, x.v.Color, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD and 3D Pass-through.Converting the twisted pair cable signal back to DVI, the receiver offers a maximum range...

Kramer Electronics 1:2 Computer Graphics Video Line and Distribution Amplifier

Kramer Electronics 1:2 Computer Graphics Video Line and Distribution Amplifier

The VP-200xl is a high-performance line and distribution amplifier for computer graphics video signals with resolutions ranging from VGA through UXGA and higher. It provides controls to compensate for signal losses inherent in long cable runs.

AVS › Reviews › Receivers & Amplifiers