or Connect
AVS › Reviews › Speakers & Subwoofers

Speakers & Subwoofers

Manufacturer

Mission M31i Bookshelf Speakers

Mission M31i Bookshelf Speakers

Technical specifications: Recommended amp power (watts): 25 - 75 Sensitivity (dB): 88 Nominal impedance (ohms): 8 Magnetically shielded? Yes Dimensions: 6.7" x 10" x 11" Frequency response (Hz): 65 - 20,000 Crossover frequency (kHz): 2.8 Biwireable? Yes Connections: Gold-plated 4mm banana socket/binding posts Bass port? Yes - rear ported ...

NXG Technology 6.5 inch Home Theater 2-Way LCR In-Ceiling Speaker With Tilt-Swivel Tweeter

NXG Technology 6.5 inch Home Theater 2-Way LCR In-Ceiling Speaker With Tilt-Swivel Tweeter

Dynamic sound you hear but don't see. Get crisp, clear sound from speakers that disappear into your room. These in-ceiling speakers install directly overhead, so you don't have to sacrifice any wall, floor or shelf space. They're a good choice for music listening in a whole-house system and some can also deliver enveloping home theater sound.The NXG Custom Series was designed for...

NXG Technology NX-SSVC6 6-Zone Speaker Selector And Volume Control With Automatic Overload Protection

NXG Technology NX-SSVC6 6-Zone Speaker Selector And Volume Control With Automatic Overload Protection

• Power handling: 100 watts RMS per channel• 12 position volume controls with 42dB attenuation• Automatic impedance protection circuitry • Individual on/off zone switching • Removable screw type connectors accept 14-gauge wire• 16 3/4" W x 2 1/8" H x 11" D; weight: 10 lbs.• Frequency response: 20Hz-22kHz • Includes room labeling system

GRS 15PF-8 15" Paper Cone Foam Surround Woofer

GRS 15PF-8 15" Paper Cone Foam Surround Woofer

The GRS 15PR-8 speaker is the best choice you can make if you need to replace a worn out, blown 15" woofer.

GRS 10PF-8 10" Paper Cone Foam Surround Woofer

GRS 10PF-8 10" Paper Cone Foam Surround Woofer

GRS 10PF-8 10" paper cone woofers are ideal replacement speakers for use in sealed-box loudspeaker systems in almost any application.

NXG Technology NX-VMS1003C 100-Watt, Slide-Style Impedance Matching Volume Control With 3 Color Kits

NXG Technology NX-VMS1003C 100-Watt, Slide-Style Impedance Matching Volume Control With 3 Color Kits

• Switchable impedance matching allows you to connect up to 16 pairs of 8-ohm speakers to a single amplifier• Stereo non-impedance matching 1x position• Soft touch 12 step slide attenuation• Removable terminal blocks accept up to 14-gauge wire• Mounting requirements: fits all single gang backless P-rings or 18 cubic inch minimum electrical work box• Frequency...

Nxg 70 Volt Transformer

Nxg 70 Volt Transformer

• Allows standard in-ceiling and in-wall speakers to be adapted for use with 70-volt music and paging systems• Frequency response: 20Hz-20kHz @ 1dB• Primary taps: 20, 15, 10, 5W• Secondary impedance: 8, 4 ohms• Insertion loss: 1dB • 6" leads• 3 3/8" W x 2 1/2" H x 2" D• Includes self-adhesive mounting pad

NXG Technology NX-W5.2-LCR-P Pro Dual 5.25" 120-Watt Center Channel In-Wall 2-Way Speaker With Pivoting Tweeter (each)

NXG Technology NX-W5.2-LCR-P Pro Dual 5.25" 120-Watt Center Channel In-Wall 2-Way Speaker With Pivoting Tweeter (each)

The center speaker is the cornerstone of a 7.1 or 5.1 channel home theater system. The majority of the film's dialogue in a Dolby Digital movie soundtrack is contained in the center channel. NXG center channel speakers are voice-matched to the other loudspeakers in the same series so that front stage effects are seamless and realistic. When a jet fighter screams across your HD display, the...

NXG TECHNOLOGY NX-RK601 Rough-in Kit for NX-PRO6200/NX-602W

NXG TECHNOLOGY NX-RK601 Rough-in Kit for NX-PRO6200/NX-602W

These rough-in kits are designed for the NXG Technology Pro, Custom and Basix Series speaker lines. Install before the drywall stage of construction for a simple and clean installation after drywall and paint. Mount at any point between 16/24" on-center studs or roof members. Designed to work with NXG in-wall speakers and are sold in pairs.

NXG TECHNOLOGY NX-RK801 Rough-in Kit for NX-PRO9300/NX-802W

NXG TECHNOLOGY NX-RK801 Rough-in Kit for NX-PRO9300/NX-802W

These rough-in kits are designed for the NXG Technology Pro, Custom and Basix Series speaker lines. Install before the drywall stage of construction for a simple and clean installation after drywall and paint. Mount at any point between 16/24" on-center studs or roof members. Designed to work with NXG in-wall speakers and are sold in pairs.

AVS › Reviews › Speakers & Subwoofers