or Connect
AVS › AVS Forum › Display Devices › LCD Flat Panel Displays › Official LNXXA650 Calibration/Settings Thread
New Posts  All Forums:Forum Nav:

Official LNXXA650 Calibration/Settings Thread - Page 131

post #3901 of 3905
Quote:
Originally Posted by Evil4blue View Post

OK, this is what I'm running for regular TV. The Blacks are awesome and it doesn't burn my retinas with its brightness. The Colors look natual to my eye, but I'm fight some slight posterization in gradients. Anyone have a suggestion to fix that.


Mode: Standard

Backlight: 6

Contrast: 90

Brightness: 44

Sharpness: 16

Color: 50

Tint: G52/r48

Detailed Settings


Black adjust: off

Dynamic Contrast: low

Gamma: -1

Color Space: Native

Flesh Tone: 0

Edge enhancement: off

Picture Options


Color tone: Normal

Size: Just Scan

Digital NR: off

HDMI Black level: Normal

Film Mode: Auto

Amp 120hz: Low/Medium

Plug & Play

Energy Saving : Low
What are your game settings?
post #3902 of 3905
A
Quote:
Originally Posted by Podol View Post


It seems less aggressive in AMP than before upgrading, and corrects few bugs including erasing 'favorite channels'.


Regarding contrast ratio, 71F's dynamic CR's are better in my measurement.

But A650 is better in panel's static CR with turning off any dynamic backlight control.

71F(Korean Model# F81BD)'s Max CR measured 27525:1(even better than Samsung's own 25000:1 spec) and then blacks read 0.012 nits that time.

That's close to Pioneer Kuro's blacks(0.013 cd/m² initially, 0.006 cd/m² after few seconds)

On the other hands, A650's max dynamic CR is limited to around 10K to 1, still better static CR than 71F.


Most new TV's from any major brand, IMO, have enough blacks and CR's unless you're watching it in a darkened room


A650 has around 2000 to 1 non-dynamic, static CR.(2291 : 1 for my measurement)

And that's pretty good enough and better than 71F, I think.

I assume Samsung changed their dynamic backlight control algorithm less aggressively this time and that's why 71F has more CR.

But A650's panels static CR's higher than 71F.


I'm not satisfied with A650's black uniformity, though.

Usually Samsung and Sony's PVA panels are better in black levels and uniformities comparing to LG's IPS panels.

A650 is still slightly better than LG's, but not as good as previous Samsung models.Quote:
Quote:
Originally Posted by capa2000 View Post

Why are some setting not available to change? Is it because I am using HDMI? Can't select some settings like Warm2 and some settings are grayed out all together. Why is this?


C


If you want to choose Warm1&2, picture mode should be 'Movie', not 'Standard' or 'Vivid'.
anyone have the latest calibrated settings or thread number for this tv
post #3903 of 3905
i don't want to start a new thread but I doo have a question regarding this TV

I just got rid of my Digital Cable and I'm now on Analog Cable.

I'm trying to output my audio to my HT Receiver in 'TV' mode (analog cable plugged straight into back of tv) Is this even possible? I've tried both the Optical Cable and RCA outputs to my receiver but I'm getting no sound whatsoever. Ive assigned the audio outputs on my Denon and I have TV Speakers set to off on the LN52A60 but I still get nothing. I thought once you set TV Speakers to off it automatically switches audio over to the outputs on the tv ?

Is anybody running a similar setup?
post #3904 of 3905
Quote:
Originally Posted by Desisuperman View Post

i don't want to start a new thread but I doo have a question regarding this TV

I just got rid of my Digital Cable and I'm now on Analog Cable.

I'm trying to output my audio to my HT Receiver in 'TV' mode (analog cable plugged straight into back of tv) Is this even possible? I've tried both the Optical Cable and RCA outputs to my receiver but I'm getting no sound whatsoever. Ive assigned the audio outputs on my Denon and I have TV Speakers set to off on the LN52A60 but I still get nothing. I thought once you set TV Speakers to off it automatically switches audio over to the outputs on the tv ?

Is anybody running a similar setup?

I send audio out via optical to my receiver. Are you sure the issue isn't source selection in the receiver? I don't recall is there is a setting on the TV to enable optical output, but it should be pretty easy to find if there is.
post #3905 of 3905
Quote:
Originally Posted by crakarjax View Post

I send audio out via optical to my receiver. Are you sure the issue isn't source selection in the receiver? I don't recall is there is a setting on the TV to enable optical output, but it should be pretty easy to find if there is.


Thanks for verifying crakarjax that it is possible. I played with the receiver a bit more and finally figured it out!
Edited by Desisuperman - 3/6/14 at 2:38pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: LCD Flat Panel Displays
AVS › AVS Forum › Display Devices › LCD Flat Panel Displays › Official LNXXA650 Calibration/Settings Thread