Originally Posted by rarcha42
I purchased a 3D panny bluray player, which outputs checkerboard format, so I tried to turn on 3d in the user menu of my tv, unable to turn on. Is it because I had my set calibrated, or is there something I'm missing. Read the manual I still can't turn 3d effects on. Will the xpand 103 glasses work with a emitter or will the 102 glasses work without or only work with out one. Thanks for any info
Ok, it is either one of two things... Your HDMI cable is not 1.4a spec or the calibrator locked the user menu using Calibration mode.
If your user menu has Calibration Mode set, you can change to Standard Mode and do your best at making proper user menu adjustments to allow best picture.
Not all calibrated Samsungs show Calibration mode, as there are two ways to calibrate this tv and use the calibration mode in the service menu.
If you want to unlock Calibration mode by making the adjustment in the service menu, going back to the service menu will wipe out most all user menu settings that were locked by Calibration mode.
You will have to write down all user menu settings for reference before going into the service menu, so you can use them when done unlocking the Calibration Mode.