The Official Integra DHC-9.9 Pre/Pro - Page 48

Originally Posted by JEF

Well gentlemen:

Still no luck, I also tried a usb adapter for grins and giggles.

I'm not grinning and I'm not giggling!

I do get request received if I am at correct speed. I'm wondering if it has to do with the 0.01 version I'm seeing?

Originally Posted by gurkey

You main firmware 0.01 must have been set up even before the "great bang..."
Does it carry a production date... may be 100 BC

Originally Posted by JEF

Actually .01 seconds after the big bang!

Ok, so now that I have had a good laugh, here is what I am having issues with:

1. HDMI video is WAY out of sync with audio. Probably because of the latest DSP update is installed and the Main firmware DSP is not.

Audyssey is now saving after DSP update, but I am getting .8-1.2 ft for my fronts and center and for the surround 1.2 ft (varies each time). My room isnt huge, but definately not that small! Could be because of main firmware? I did go over the Audyssey FAQ, but nothing seems to work. It could also be that I am using Infinity Betas up front and the woofers are stacked four high on each side along with the crossover, but the mid high panels are fed from the crossover as well. My surrounds are Infinity QLS's which have a single 12" woofer. hmmmm...

Thanks again!

Originally Posted by gurkey

Does your display have HDMI 1.3 spezified interfaces ?
If so, then this spec should automatically enable correct audio sync between AVR (repeater) and display. I don't have this issue with my brand new Sony LCD...

Audyssey doesn't seem to like stacked speakers or multiple subs in parallel judging by the comments in the Audyssey thread.

I would consider a service point firmware update to get those odd firmware versions corrected. I am not sure even, if the main 0.01 is an official version and would contact Integra about this...

Originally Posted by JEF

Unfortunately, my pj is not 1.3, however I didnt have the sync issue before updating the DSP's. I traded one problem (Audyssey not completing a save) for sync issues!

I saw the threads about the sub issues as well...

My next step is to contact service center. Luckily there is one in St. Louis.

Thanks!

Originally Posted by JEF

Unfortunately, my pj is not 1.3, however I didnt have the sync issue before updating the DSP's. I traded one problem (Audyssey not completing a save) for sync issues!

I saw the threads about the sub issues as well...

My next step is to contact service center. Luckily there is one in St. Louis.

Thanks!

Originally Posted by ssabripo

gurkey,
i've tried to download the 886 files from the rapidshare links you provided, but they all give me an error (session failed, etc). Is there a way you can send me an alternate link so I can post it on the 886 thread?

thanks in advance

Originally Posted by gurkey

But you did unplug you unit after the update, didn't you ?
This will reinit the CPU.
May be a "Init" should be followed by this, but the DSP update seems to do this on its own already...

Originally Posted by jrannison

I would contact the service center. When I bought my DHC-9.9 from an authorized dealer, I asked about service support and he indicated that Integra units are exchange replacement for the first six months. I asked if that is the dealers policy and he indicated it is Integra's policy.
It turns out I did have a failure with a Gamma issue and indeed I had a replacment unit within two days from the west coast distribution center to my dealer to me. I was impressed , considering all the complaints with Onkyo.

Originally Posted by JEF

Lol!! Yes! I have unplugged the unit numerous times since the DSP update to do the Main firmware update that hasn't worked.

Originally Posted by jrannison

If you obtain the fixture (the Serial Level converter for updating the Loader) that talks directly to the CPU, pehaps that might work. Gurkey would be the one to know the answer, as I have not followed that thread.

Originally Posted by ssabripo

gurkey,
i've tried to download the 886 files from the rapidshare links you provided, but they all give me an error (session failed, etc). Is there a way you can send me an alternate link so I can post it on the 886 thread?

thanks in advance

Originally Posted by jrannison

It depends on which device has the better processor. I have found in my case that the components (DVD, Monitor,etc.) have the better processing and I just don't use the Integra. For example I have an old VCR that is used on rare cases. I found that the Monitor did a better upconversion to 1080P then my Integra. It was close but still a visable change.

The less processing in the supply chain, the less problems.

Originally Posted by gurkey

No download helpers are allowed, just a plain and simple single connection and everything just works out fine...

Originally Posted by kmchenry

Who were you responding to?

Originally Posted by gurkey

No download helpers are allowed, just a plain and simple single connection and everything just works out fine...

Originally Posted by ssabripo

$20 to the first person who can figure out a discrete code to turn Audyssey ON/OFF !!!

Originally Posted by ssabripo

i tried firefox, chrome, and IE, and nothing....still same error.

Originally Posted by gurkey

Don't really know.
Hundreds of people have downloaded from this location already...
I tested it myself and it works just fine.

Any firewall settings interfering...

Originally Posted by ssabripo

perhaps rapidshare has my IP blocked for some reason, etc.


if anyone can upload the 886 to another uploader temporarily, I would appreciate it...both DSP and Main FW

Originally Posted by gurkey

I don't think "rapidshare" is blocking but rather "something" else is, if any.
For "free" users there is a waiting "penalty" for each download.
1st time (per day) around 60 seconds, afterwards about 15 minutes per download.

Originally Posted by ssabripo

perhaps rapidshare has my IP blocked for some reason, etc.


if anyone can upload the 886 to another uploader temporarily, I would appreciate it...both DSP and Main FW

Originally Posted by kilinko

How do you check what version dhc 9.9 is running?

Originally Posted by Rayjr

You should be able to do Audyssey Calibration out of the box...and the unit should have come with a mic.
To do Audyssey Pro Calibartion......you will need firmware 1.05 and a pro installer to do this.

Hope this helps
RayJr