post #1 of 1
Thread Starter 
Network Attached Storage (NAS) On a Home Network
Author: Grayson Evans
It's simple; if you're installing a data network as part of your custom install, then you should be installing a NAS device as part of that network.

NAS is a data network attached dedicated file server accessible by any computer (and many media clients) attached to the same network. Configuration and control is by web browser communicating with a web server in the NAS. The OS, disk management, and file server software are embedded so the device operates as a network appliance. Turn it on and it's up and running in a few seconds.

NAS can be used to keep common family files such as photos, music, and video in one place, accessible by everyone, as well as a secure place to backup all the family computers. It can also be used as a music/video server with a client device at the display device.

NAS units are commonly configured with 2 to 4 SATA drives, usually 500G each, but newer units can be configured with 1TB drives (for a total of 4 TB of storage). Some NAS software allows mixing drive sizes. The total storage available to the network depends on how the drives are configured and used by the NAS OS, usually in a RAID configuration (see below). Connection to the NAS from computers on the network is done through the computer OS as though the drive was attached as an external storage device.

Read the complete article in the latest issue of our eMagazine at