Input lag wars!, post your input lag results of your LCD display here for reference - Page 3

Were you around when that DELL monitor came out first the input lag was even worse and then the people complained seriously and then later on the next batch of it reduce it a little more to something along the lines of a 120hz TV we have. It's about the same when you turn on the image enhancers but when you turn them off while still not being game mode or pc mode it is faster. Not super much but I did say better. The problem with those PC monitors is that there isn't a game mode that I can remember unless the new ones are coming with one.

lcds sux. lets all go back to our crappy ol sd crts n pwnz teh laggy hdtv noobz!

No way! I already got my macro programmed. Tap of the f12 = "gg input lag"

Are we accepting Rock Band 2's auto calibration numbers as valid data?

For those of you who haven't seen it: Rock Band 2's guitar has a light sensor on it; when you select auto calibrate it pulses white on the screen and the console measures the difference between time pulsed vs. time seen. I probably should do a sanity check on the same device to double check it's findings, but I'm lazy.

That being said, my 57" Sony RP CRT TV in all modes(model to follow)(1080i) clocks in at 0ms according to the game. My 42" TH-C42HD18 Plasma in game mode (720p) registers at 32ms.

I went to Best Buy yesterday and asked the manager if I could lug in my console & fake plastic guitar to test out new sets before I buy. He was skeptical at first, but when I told him that "if I can't do that I'll just buy and return sets until I find one I like" he was in agreement.

So, any opinions?

Edit: I know these aren't LCDs, but I'm hoping to be collecting data from those in this manner so I just wanted to check...

The lz800 seems to be the fastest panel one can get even though there is only the one picture to verify its performance. I wonder if the new Panasonic LCD panels would be good for gaming? The 8ms response time on the them keeps me from buying one though. Any thoughts?

I can give you many if you want. And there's plenty of pictures, some of which I even did back in Nov of last year in the owner's thread.

Pixel response time has very little impact on input lag. Pixel response time is more of a measurement to determine ghosting. The panel is great for gaming however finding one that's reasonably priced these days is another matter. If I could rewind time, I should've gotten a 37 inch for 600-800 bucks back in december. Oh well.

I think you misunderstood the point I was getting at, I believe you. I was wondering though if the TC-L32S1 would provide similar performance? And if so why are no gamers going to that?

Hi, interesting discussion here. I was wondering, do certain types of material lag more than others? eg: will watching a BD have the same amount of lag as playing a game?

The reason I ask is that my BD player has a built in audio delay function in it, and I was wondering if that would be a good way to measure lag (I don't own a CRT).

Here is something for anyone not realizing what all this talk about is really about. Input lag is something to do with playing games no worries when watching movies at all since your not inputting something your just sitting on your ass and watching something.

When talking about watching something it is motion blur is what you should worry about and in the past response time but now LCD are no problem in that department. LCDs are good with the motion blur too and for some of the sensitive people 120hz LCD TVs have Motion Plus technologies to help out in that now.

Input lag= Gaming worries for a very small % of hardcore gamers. Game Mode on 08 TVs in general are fast enough for like 99% of gamers out there.

If your not a gamer or care then you don't even need to be in here looking at these numbers period.

Also...
INPUT LAG IS NOT THE SAME AS RESPONSE TIME!!!

U sure it wasn't the lz85 I returned? Lol!

Uhhh... why couldn't a movie lag? It outputs a video signal which gets processed by the TV which introduces lag. That's why my BD player has an audio delay function to fix lip syncing issues. My question is that wether or not this lag is consistent for all video sources, and if so, would using the audio delay function on my BD player (currently @ 50ms for an XBR6 with everything on) be an accurate way of measuiring gaming lag.

How does your BD player determine the audio delay? Does it just take the information from the TV or are you setting this by hand?

The input delay, if it's bad enough and not compensated for by some other mechanism, can definitely affect movies in that the audio and video may be out of sync, though it's often hard to tell unless it's really bad.

I have to manually pick what to set the delay to. It ranges from 0ms - 120ms.

Hey does anyone know if the PS3 or Fios Box offer this audio delay option?

I guess it's ok to get in the ballpark, but there's a lot of subjectivity that shouldn't be there for a reliable test.


The PS3 doesn't have the option, but you shouldn't need it if you're using HDMI... if you're using optical, a lot of receivers have an audio delay option.

My BD player is connected by HDMI and there's still an audio lag unless I specify a 50ms delay.

Someone did an input lag test for the B650 using Rockband
http://www.avforums.com/forums/lcd-t...thread-11.html

Yeah, problem is I have a Marantz Sound Bar speaker that only supports HDMI 1.1 (no auto lip sync). It has it's own build in amp and does not require a receiver. I've been on the verge of buying a TV for forever. The plan is to have the PS3 and Fios Box decode the audio and pass PCM audio to the TV. Guess I'm screwed a far as lip syncing is concerned?

I'm not sure I'm understanding this.. If lag is caused by processing on the TV, how would auto voice sync even help? Does the TV talk back to the originating device and tell it "hey I'm processing which causes me get out of sync by 50ms, so please delay audio by 50ms."

My BD player is connected direct to the TV btw.

As far as I can tell, the only devices that incorporate HDMI lip syncing are HDMI 1.3 receivers. I own an XBR6 and if my TV doesnt automatically adjust for audio delay then I highly doubt that most TVs do this either.

Here's an easy way to test. connect your TV directly to a BD player with an HDMI cable. from the BD player use optical or coax out to a receiver. Play a BD and audio will go to the TV speakers and the reveiver's speakers. If the TV is inserting an audio delay then there should be a slight echo effect.