AVS › AVS Forum › Display Devices › Digital Hi-End Projectors - $3,000+ USD MSRP › Less obvious tips for PJ hanging?
New Posts  All Forums:Forum Nav:

Less obvious tips for PJ hanging?

post #1 of 10
Thread Starter 
Now that the drywall is primed in the basement, I am starting the finishwork. Before I get too much farther, I want to nail down the exact location of the PJ. I am looking at the Panny 3000U. While I am looking to keep it towards the wide angle side of its throw range, there is still room on either side of the range to make adjustments front to back.

Are there any nuggets of logic out there that people would like to share about their placement that wouldn't seem obvious? (not including standard things like keep the PJ level and square to the screen, distance needed to fill the screen, etc.) Please share the unique conclusions that you have come to which a distance chart on Projectorcentral would not convey to the average first-timer.

Is it better to have the PJ mounted in front of/directly overhead/behind the main chair? Why?

Anyone find that their PJ is close to getting bumped by people on the riser when they get up out of their chairs? Etc.

Thanks!

-Suntan
post #2 of 10
Quote:


Is it better to have the PJ mounted in front of/directly overhead/behind the main chair? Why?

I think that mounting the projector behind you makes any noise it makes harder to hear, especially if the exhaust vents from the back.
post #3 of 10
Think about what would occur if your next projector needs to be at a different location than this one.
What if there's yet another cabling system in a few years?
post #4 of 10
So, since the exhaust is on the front of the 3000, then it makes some sense to put it in front of you. My 2000 is right behind me and up about 2 feet. I can't hear a thing. So I don't think the issue is very significant in your case.

Don't forget to take into account whether your screen is angularly reflective or retro-reflective (like a DaLight High Power). When you figure that out, it will control the height of the projector and screen installation relative to your eye. It probably doesn't matter much on a typical angularly reflective screen.

You might consider whether you are absolutely certain you will be happy with your screen size. If there is a chance you might want to go bigger after a while, you will have to remount if you are mounting at the widest zoom now.
post #5 of 10
Quote:
Originally Posted by JHouse View Post

So, since the exhaust is on the front of the 3000, then it makes some sense to put it in front of you. My 2000 is right behind me and up about 2 feet. I can't hear a thing. So I don't think the issue is very significant in your case.

Don't forget to take into account whether your screen is angularly reflective or retro-reflective (like a DaLight High Power). When you figure that out, it will control the height of the projector and screen installation relative to your eye. It probably doesn't matter much on a typical angularly reflective screen.

You might consider whether you are absolutely certain you will be happy with your screen size. If there is a chance you might want to go bigger after a while, you will have to remount if you are mounting at the widest zoom now.

The 3000 is incredibly quiet. It sits about 1' behing me, 1' down from a 8' ceiling.

I can't hear it all during movies, and when I turn it off, I can't ever hear the fan running to cool the bulb down (like I could with my 700).
post #6 of 10
Thread Starter 
Quote:
Think about what would occur if your next projector needs to be at a different location than this one.
What if there's yet another cabling system in a few years?

Not an issue. The basement will have drop ceiling tiles.

Quote:
You might consider whether you are absolutely certain you will be happy with your screen size.

Again, ceiling tile makes this less of an issue to change down the road. Further I was planning to just use the wall for the first bit to make sure we are happy with the screen size.

A 120” 2.40:1 screen at the widest setting puts it at 12 ½ feet. The head position of the first row will be at 11 feet. This puts the back of the PJ at somewhere around 13 to 14 feet which is right where the “aisle” space of the second row/riser is. The riser is approx 12” high with 8 foot ceilings in the room (after the drop ceiling.)

Anyone have problems with people bumping their PJs while getting to/from their seats on the riser? That is my main concern right now.

Thanks for the input.

-Suntan
post #7 of 10
Quote:
Originally Posted by Suntan View Post

Not an issue. The basement will have drop ceiling tiles.

The riser is approx 12” high with 8 foot ceilings in the room (after the drop ceiling.)

Anyone have problems with people bumping their PJs while getting to/from their seats on the riser? That is my main concern right now.

Thanks for the input.

-Suntan

I have a similar setup, except my riser is 9 3/4" with 8' ceilings. Even though the projector does sit behind me, I have to be careful not to bump it with my head (I am 6'2"). The thing that caught me off guard about this projector is that it is massive (I had a Panny 700 before).

When I saw the shipping box it came in, I was floored and thought that it was a lot of extra packing...it's not, the projector is that huge.

I can attach screen shots of my setup if that would be helpful for a reference point.
post #8 of 10
Thread Starter 
Quote:
Originally Posted by pokeyron View Post

I can attach screen shots of my setup if that would be helpful for a reference point.

Yes please.

How far back do you have the PJ? And how far down from the ceiling do you have it?

If I put it such that the lens is physically no higher than the top of the screen (I understand this is a requirement to use the pseudo-anamorphic shift capabilities), that puts it at about 2 feet down from the ceiling and right in the prime area for people to bump it. Any suggestions short of building a cattle guard around it?

-Suntan
post #9 of 10
Quote:
Originally Posted by Suntan View Post

Yes please.

How far back do you have the PJ? And how far down from the ceiling do you have it?

If I put it such that the lens is physically no higher than the top of the screen (I understand this is a requirement to use the pseudo-anamorphic shift capabilities), that puts it at about 2 feet down from the ceiling and right in the prime area for people to bump it. Any suggestions short of building a cattle guard around it?

-Suntan

Sure thing. I'll snap some pics tonight and post them for you. I have my recliners removed at the moment since our carpet just got put in yesterday, but I think it will give you a good idea.
post #10 of 10
i like the projector behind me. I would think that having the projector in front of you could have the projector in your line of sight when watching a movie.
New Posts  All Forums:Forum Nav:
  Return Home
AVS › AVS Forum › Display Devices › Digital Hi-End Projectors - $3,000+ USD MSRP › Less obvious tips for PJ hanging?