AVS › AVS Forum › Audio › Receivers, Amps, and Processors › Audyssey Auto-Setup Issues
New Posts  All Forums:Forum Nav:

Audyssey Auto-Setup Issues

post #1 of 13
8/24/09 at 5:45pm
Thread Starter 
When I do the Audyssey Auto Setup and it starts with the speaker detection, every time it runs it shows the either no speaker or no microphone. Is there any tricks or maybe did I just get a ****** microphone. Sound is coming out of the speakers buts that so its not the connection.
Reply
Reply

AVS Top Picks

post #2 of 13
8/24/09 at 6:23pm
There is a whole thread about this already and it has a link to a Guide in the first post:
http://www.avsforum.com/avs-vb/showthread.php?t=795421
Reply
Reply
post #3 of 13
8/24/09 at 6:41pm
Thread Starter 
How am I suppose to find what I am looking for in that giant thread?
Reply
Reply
post #4 of 13
8/24/09 at 6:49pm
Quote:
Originally Posted by Demoic View Post

How am I suppose to find what I am looking for in that giant thread?

Read the Guide. It is clearly structured so that you can find things. Alternatively, you can search the thread but I recommend the Guide.
Reply
Reply
post #5 of 13
8/24/09 at 9:21pm
Why all channels are always too minus volume when using this autosetup?
Reply
Reply
post #6 of 13
8/25/09 at 12:03pm
Thread Starter 
Quote:
Originally Posted by Kal Rubinson View Post

Read the Guide. It is clearly structured so that you can find things. Alternatively, you can search the thread but I recommend the Guide.

I read through the guide and searched and found nothing on my problem I havn't already tried.
Reply
Reply
post #7 of 13
8/25/09 at 12:08pm
Quote:
Originally Posted by Demoic View Post

When I do the Audyssey Auto Setup and it starts with the speaker detection, every time it runs it shows the either no speaker or no microphone. Is there any tricks or maybe did I just get a ****** microphone. Sound is coming out of the speakers buts that so its not the connection.


Could be a bad mic. Obtain a replacement and see if that fixes your problem. If it doesn't then it is probably an internal problem.

Dumb question: Does the unit play back properly at louder listening levels? If not you could have some amplifier issue.
Reply
Reply
post #8 of 13
8/25/09 at 12:57pm
Quote:
Originally Posted by Toknowshita View Post

Could be a bad mic. Obtain a replacement and see if that fixes your problem.

That seems most likely.
Reply
Reply
post #9 of 13
8/27/09 at 3:29pm
Thread Starter 
Quote:
Originally Posted by Toknowshita View Post

Could be a bad mic. Obtain a replacement and see if that fixes your problem. If it doesn't then it is probably an internal problem.

Dumb question: Does the unit play back properly at louder listening levels? If not you could have some amplifier issue.

I ended up sending it back hopefully that will fix it. Also, yes it does play back properly at louder listening levels.
Reply
Reply
post #10 of 13
9/9/09 at 8:31pm
Thread Starter 
Quote:
Originally Posted by Demoic View Post

I ended up sending it back hopefully that will fix it. Also, yes it does play back properly at louder listening levels.

UPDATE:

In case anyone was curious this was the problem.
Reply
Reply
post #11 of 13
9/9/09 at 9:22pm
Quote:
Originally Posted by Demoic View Post

UPDATE:

In case anyone was curious this was the problem.

good to know, i just got my denon and havent run audessey yet
Reply
Reply
post #12 of 13
10/1/09 at 5:09am
so it was an amplifier problem? Or the mike? Mine does the same thing.
Reply
Reply
post #13 of 13
5/7/12 at 10:28pm
Was it the mike? I am having the same issue. Thing goes whomp whomp whomp and then says no mike or speaker.

How did you get a replacement mike?
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Receivers, Amps, and Processors

AVS Top Picks

AVS › AVS Forum › Audio › Receivers, Amps, and Processors › Audyssey Auto-Setup Issues