I want to use two speaker boxes that I already have in a new 5.1 system as the front left and right speakers. Each speaker box contains 3 speakers for lows-mids-highs, they came as a mini-stereo system if you will. But I can't figure out how to wire the speakers to match the receiver's output. There are four wires coming from each speaker box (2 R and 2 L) and only two outputs on the receiver ( 1 R and 1 L). To make matters worse I don't know the impedance of each speaker, the manual for the mini-stereo-system only provides that the total load impedance is 6Ω. Could you help me figure out how I could wire the speakers to show the amp the 8Ω load?
some useful info:
1.) (speakers) Manual provides that total load impedance is 6Ω
2.) There are four wires for each speaker box (containing 3 speakers per box)
3.) Receiver rated at 8 Ω
Owners manual: http://service.us.panasonic.com/OPERMANPDF/SCAK27.PDF
Link to service manual for mini-stereo system's receiver/amp/cd-player:
http://servicemanuals.electronica.ro/schematics/panasonic/cd_stereo_system/pan27.pdf
for the above link, the relevant pages are 23 and 30.
some useful info:
1.) (speakers) Manual provides that total load impedance is 6Ω
2.) There are four wires for each speaker box (containing 3 speakers per box)
3.) Receiver rated at 8 Ω
Owners manual: http://service.us.panasonic.com/OPERMANPDF/SCAK27.PDF
Link to service manual for mini-stereo system's receiver/amp/cd-player:
http://servicemanuals.electronica.ro/schematics/panasonic/cd_stereo_system/pan27.pdf
for the above link, the relevant pages are 23 and 30.
