AVS › AVS Forum › Blu-ray & HD DVD › Dual Format Players › BH200 Playing DVD+R's
New Posts  All Forums:Forum Nav:

BH200 Playing DVD+R's

post #1 of 15
10/8/09 at 6:46pm
Thread Starter 
I tried playing back home HD movies I burned on to a DVD+R in Bluray format but the BH200 won't read them. Is this a known issue or should I try a DVD-R or something? I can play them back fine in my Sony S300 and PS3.
Reply
Reply

AVS Top Picks

post #2 of 15
10/12/09 at 7:17am
Quote:
Originally Posted by XBRSteve View Post

I tried playing back home HD movies I burned on to a DVD+R in Bluray format but the BH200 won't read them. Is this a known issue or should I try a DVD-R or something? I can play them back fine in my Sony S300 and PS3.

It is known not to work in firmware later than April 2008. Which firmware do you have installed?
Reply
Reply
post #3 of 15
10/13/09 at 11:17am
That's BD-R/BD-RE sivartk.

I've not read of problems with DVD-R/RW or DVD+R/RW but I must admit, I've never tried it. CD-R is fine though.
Reply
Reply
post #4 of 15
10/13/09 at 1:07pm
Thread Starter 
Quote:
Originally Posted by sivartk View Post

It is known not to work in firmware later than April 2008. Which firmware do you have installed?

I have the latest firmware.
Reply
Reply
post #5 of 15
10/13/09 at 2:26pm
Quote:
Originally Posted by bradavon View Post

That's BD-R/BD-RE sivartk.

I've not read of problems with DVD-R/RW or DVD+R/RW but I must admit, I've never tried it. CD-R is fine though.

...however the OP was burning it in a BD-R format. Sure DVD+R will work fine for DVD format.
Reply
Reply
post #6 of 15
10/13/09 at 8:36pm
I've not had a problem with DVD-or+r
Reply
Reply
post #7 of 15
10/14/09 at 6:10am
Thread Starter 
Quote:
Originally Posted by munciefan View Post

I've not had a problem with DVD-or+r

What are you burning on it? Regular DVD video or HD? I can burn video as a regular DVD it works fine but if I burn it in BluRay format it doesn't.
Reply
Reply
post #8 of 15
10/14/09 at 4:15pm
Quote:
Originally Posted by sivartk View Post

...however the OP was burning it in a BD-R format. Sure DVD+R will work fine for DVD format.

Oh yeah. Well spotted. I didn't even know that was possible. How do you do that?

Surely that's completely unofficial, so pot luck if it works on any Player, no?
Reply
Reply
post #9 of 15
10/21/09 at 9:09pm
They play just fine with the latest firmware.

I have a 100+ HD TV shows that I've burnt to DVD and no issues at all.

When burning, make sure that you set to UDF File format an under advanced set to profile 2.5.

The best program to creature you blu-ray profile is TSMuxeR. The latest version is 1.10.6 I think. If it successfully creates the image, then it will play. If you get an errer, chances are it is the audio profile that you are having a issue with so try to adjust that.
Reply
Reply
post #10 of 15
10/26/09 at 10:15pm
Thread Starter 
Quote:
Originally Posted by 2shave View Post

They play just fine with the latest firmware.

I have a 100+ HD TV shows that I've burnt to DVD and no issues at all.

When burning, make sure that you set to UDF File format an under advanced set to profile 2.5.

The best program to creature you blu-ray profile is TSMuxeR. The latest version is 1.10.6 I think. If it successfully creates the image, then it will play. If you get an errer, chances are it is the audio profile that you are having a issue with so try to adjust that.

You burned them to a DVD in m2ts format?
Reply
Reply
post #11 of 15
10/27/09 at 5:29pm
Quote:
Originally Posted by XBRSteve View Post

You burned them to a DVD in m2ts format?

Tsmuxer has an option to output in BD disk format with the necessary folders that you can then burn to disk.
Reply
Reply
post #12 of 15
10/28/09 at 12:30am
Quote:
Originally Posted by XBRSteve View Post

You burned them to a DVD in m2ts format?

No, you take the raw video (usually a ts or m2ts file) and input it into TsMuxer. Then set the output to Blu-ray disk

Quote:
Originally Posted by baytoLA View Post

Tsmuxer has an option to output in BD disk format with the necessary folders that you can then burn to disk.


Correct.

Just make sure that when you burn the disk, you set the disk structure to UDF and profile 2.5. If you don't, then the disk will likely not play on anything but your home computer and a sony ps3. Set correctly it will play on the bh-200.
Reply
Reply
post #13 of 15
11/27/09 at 11:56am
Thread Starter 
I firgured it out. I am using Nero and forgot to choose No Multisession. Once I selected that it plays back fine in my BH200.
Reply
Reply
post #14 of 15
11/27/09 at 12:26pm
Are you guys creating BD-9's, AVC-HD's or 3x DVD (HD DVD) with this option?

I thought BD-R/RE's were only available in the 25/50 GB discs and that BD-9's had to be pressed with AACS encryption.
Reply
Reply
post #15 of 15
11/27/09 at 2:46pm
Quote:
Originally Posted by allargon View Post

Are you guys creating BD-9's, AVC-HD's or 3x DVD (HD DVD) with this option?

I thought BD-R/RE's were only available in the 25/50 GB discs and that BD-9's had to be pressed with AACS encryption.

They're talking about burning the BD format to DVDs i.e. DVD+R DL ("BD-9") and DVD+R ("BD-5"). And yes you can also make AVCHDs and HDDVDs on DVD discs too. No AACS encryption needed, but of course you need a BD player for BD/AVCHD format discs and a HD DVD player for HD DVD format discs, or a BH200 w/April08 firmware.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Dual Format Players

AVS Top Picks

AVS › AVS Forum › Blu-ray & HD DVD › Dual Format Players › BH200 Playing DVD+R's