or Connect
AVS › AVS Forum › Audio › Receivers, Amps, and Processors › sr606 problem please help
New Posts  All Forums:Forum Nav:

sr606 problem please help

post #1 of 6
Thread Starter 
i just finished hooking up my enerygy rc micro speakers to my new sr606 amp i calibrated the speakers using the mc and everything was fine i started watching transformers and it sounded pretty good when all of a sudden the sound just turned off the picture is still there but no sound i checked all my speaker connections and everthing is good i dont know what else to do everthing is hooked up via hdmi. i even swithced out the hdmi but still no sound please help me. thanks
post #2 of 6
Thread Starter 
does anyone have any idea whats going on or wats wrong with the reciever?
post #3 of 6
Thread Starter 
any 1
post #4 of 6
Is the receiver getting sound through the tuner?
Try resetting the receiver: page 96 in OM
Quote:


To reset the AV receiver to its factory defaults,
turn it on and, while holding down the [VCR/DVR]
button, press the [ON/STANDBY] button. “Clear”
will appear on the display and the AV receiver will
enter Standby mode.
post #5 of 6
Thread Starter 
i reseted the system still no sound. i tried the fm tuner still no sound i tested all the speakers with my sony reciever all are working fine so i now know its the reciever im going to be returning or exchanging it at frys tom.
post #6 of 6
Sorry to hear that, it looks like another member has this issue also in the TX-SR606 Thread.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Receivers, Amps, and Processors
AVS › AVS Forum › Audio › Receivers, Amps, and Processors › sr606 problem please help