or Connect
AVS › AVS Forum › Video Components › Home Theater Computers › EDID Overrides to solve bitstreaming issues for ATI 5xxx's
New Posts  All Forums:Forum Nav:

EDID Overrides to solve bitstreaming issues for ATI 5xxx's - Page 118

post #3511 of 3895
I wonder if I could have some of the same.

New Samsung PN51F8500, a Denon 2112ci and a ATI 6670.


Thanks! To Mod.zip 2k .zip file
post #3512 of 3895
Does anyone know the formula for combining the two?
I'm trying to see what needs to be done myself but can't pull up any info.
post #3513 of 3895
Thread Starter 
An EDID override shouldn't be required in your case. What is the issue? Player, OS? Are you using latest AMD drivers for the card? Is the DENON set to NO pasthrough of the TV audio? etc.
post #3514 of 3895
Hi Tulli, thanks for the reply. I'm currently using slightly older 12.10 ATI drivers as I have had the most luck with them and my older LCD TV.
Now with the new Plasma, the old problem has returned but is more prevalent.
I have tried the latest 13.1 drivers.

HTPC - AMP - TV

CEC disabled on TV
Denon HDMI Control is set to OFF

My HDMI handhsaking randomly does not link, no matter what sequence or delay I use for turning the devices on.
The problem manifests itself as the HTPC sticks in 640x480 (from an RDP session) with no detection of the AMP/TV - HDMI audio device becomes disabled.
The TV displays no connection.

I have to power off and on devices and randomly the handshake will work.

I have tried all possible permutations.
When the handshake works, all types of audio work correctly.-
Bitstreaming works fine and I get DD correctly from Media Center.

I assumed a forced EDID may help the handshake part?
Edited by pieandchips - 3/27/13 at 7:12pm
post #3515 of 3895
Thread Starter 
See if the override helps:

Samsung PN51F8500 - DENON 2112ci.zip 1k .zip file

Other than that if the driver is not the problem try swapping cables or switching to a different HDMI port on the DENON.
post #3516 of 3895
You are most kind sir.
Do you have a paypal account I can buy you a beer? smile.gif
post #3517 of 3895
Well you appeared to have helped!
Since installing the inf, I get picture every time, no matter what sequence or delay I power up the TV or amp.
Occasionally Media Center would fall into 1024x768 mode, so this from TGB.com has appeared to complete the fix!
Quote:
Originally Posted by Wedge__A @TGB.com 

I just bought a new receiver and started routing the HDMI output through the receiver and encountered the same problem - Media Center reset to 1024x768 after receiver/TV have been turned off and turned back on.

I believe I've found a relatively simple fix.

When this happens, immediately in Media Center go to the Tasks - and the Configure TV settings - YOU MUST DO THIS WHILE THE DISPLAY IS IN 1024X768 MODE
When asked if you want to change the display setting, enter yes
Scroll through the resolution list and select "List All" (since Media Center is confused about the current display resolution, it doesn't list 1080p in the initial list)
Scroll down towards the bottom of the resolution list and select 1920x1080, 60hz
And complete the monitor configuration (you can skip the "adjust" display controls steps)

At least in my configuration, this puts the display back into 1080p - and it has stayed - even after a reboot of the PC (with or without the receiver turned on) and after the receiver/TV have been turned off and turned on again.

Thanks for the assist Tulli smile.gif
Edited by pieandchips - 3/28/13 at 6:58am
post #3518 of 3895
Hi Tulli

I have a Pioneer Elite VSX-92TXH that I need a override for. I cant seem to find one for the AVR so I did a moninfo on it. Are you able to create a override for have one for the pioneer ?

Its also attached to a Sharp 70LE640
Sharp70le640u-moninfo.zip 1k .zip file


Thanks!

vsx-92thx-moninfo.zip 1k .zip file
post #3519 of 3895
Thread Starter 
What's the issue, specifically? And specs (OS, graphic adapter & drivers)?
post #3520 of 3895
Hi,

This is for Win7 64bit/XBMC Frodo. First issue I had was geting the Realtek driver to show more then 2 supported channels. Having issues with the Asus (AMD CPU) onboard HD4250 HDMI not passing the full sound to the AVR I can get DTS, DD AAC etc but not DTS-HD or True-HD . Of course trying to get as closeto 7.1 as I can smile.gif I have switched from the Realtek drivers to the AMD High Def Audio with the same results (going back to Driver Suite starting at version 12.4 and going to 13.10). Going back on forth with attempts on the XBMC fourm it is suggested that I should use a override.

Full details
Asus M4a88td-v evo/usb3
Windows 7 64 bit Ult
Video onboard Integrated ATI Radeon™ HD 4250 GPU
Audio onboard Realtek ALC 892 8-Channel High Definition Audio CODEC (switched back to AMD Drivers)
xbmc ver Frodo (was previous version wiped htpc and loaded fresh)


Thanks
post #3521 of 3895
Thread Starter 
That is a HD4xxx ATI series graphic adapter, so it can't bitstream HD audio. You need at least a 5xxx series for that.
post #3522 of 3895
Well that would answer that! Time to look for anotehr motherboard...

The only other thing that I am trying to get working is the driver either AMD or Realtek shows 2 channel. Not sure why that is.

Thanks
post #3523 of 3895
Thread Starter 
That's because the max bandwidth you can get over S/PDIF is 2 channels of uncompressed LPCM audio. But multi-channel compressed audio (DD or DTS) should work by sending the audio stream without decoding.
post #3524 of 3895
I am assuming if I upgrade the video card with HDMI that this would have no impact to the audio side as it would not tie in? I have a ATI Firepro V5700.


I have been thinkingabout this. I may just build another machine. Where can I find recommendations on AMD CPU motherboards with onboard Video and HD audio?

Thanks
post #3525 of 3895
Thread Starter 
post #3526 of 3895
hi,
first, sorry for my very bad english, i'm french and it's hard for me biggrin.gif
i have a radeon 5850 and i want to use the hdmi output with a hdmi splitter for connect my audio AVR (Harman Kardon avr 260) and my vp (sony hw30).
when i connect only the avr on radeon, the multi channels pcm is ok (and dts hd), but when i use my splitter, i have only 2 channels pcm (whereas it's support audio hd), is this due of a bug with radeon 5850 audio driver ? the edid override is it a good solution for me ?

Thanks for your helps !
post #3527 of 3895
Thread Starter 
Yes, an EDID override will fix it. Post the real time EDID of your proj.
post #3528 of 3895
hi,

i have bin files, it's ok ?
two files :
HCG0163.bin -> the edid for my amp (harman kardon avr 260)
SNYA8F3.bin ->the edid for my vp (sony hw30)
HKAVR260+SONYHW30.zip 0k .zip file

Thanks you ! smile.gif
post #3529 of 3895
Thread Starter 
The EDIDs are only 128 bytes. I need the full, real-time 256-bytes EDID. See 1st. post for instructions.
post #3530 of 3895
sorry, here the real time edid :
HCG0163-SNYA8F3.zip 2k .zip file

Thank you smile.gif!
post #3531 of 3895
Thread Starter 
post #3532 of 3895
yeah ! good job, works perfectly !
i'm very happy, thank you so much !
post #3533 of 3895
Hi Tulli,

I have a HTPC with an ATI 6450 connected through an Onkyo TX-NR414 to a Toshiba 40RL958B. On some boots from sleep, there will be no audio and videos will run at about two frames per second. The display also fails sometimes when quitting XBMC (which is in full screen mode) and entering Windows. A reboot will fix either problem, but I'd like to find a solution - do you think an EDID override could help? It's all or nothing at the minute (I either get full audio format support or nothing at all), so it isn't the usual problem of a few formats not working.

Thanks.

Toshiba and Onkyo.zip 3k .zip file
post #3534 of 3895
Forgot to mention the OS - it's windows 8 64.
post #3535 of 3895
Thread Starter 
post #3536 of 3895
HELP! Please!
I have a mitsubishi WD-73840 connected to a home built computer with CF HD6850s.
It will bitstream movie data just fine, but games are what I was really interested in. The TV has built in 5.1 sound on a 16 speaker sound bar, so its psycho acustic reflected sound. It works pretty well.
I actually bought a DVI+SPDIF -> HDMI adapter. It works but its HDMI 1.3b and for some reason I'm not getting 1:1 pixels anymore. I had to use a Digital dolby live card with it to encode the audio but its older and the audio skips because it was never really ment for a 64 bit OS.

I think EDID is my last hope for getting high quality picture and surround sound. Please if anyone could take pity on me and help me make an EDID file. With the adapter I do get surround sound. I think the only problem is that the TV's EDID reports that there are only 2 speakers instead of like this
Code:
CE audio data (formats supported)
  AC-3    6-channel,  640k max. bit rate at 32/44/48 kHz
  LPCM    2-channel, 16/20/24 bit depths at 32/44/48 kHz

CE speaker allocation data
  Channel configuration.... 2.0
  Front left/right......... Yes
  Front LFE................ No   <----Make these Yes
  Front center............. No   <----Make these Yes
  Rear left/right.......... No   <----Make these Yes
  Rear center.............. No
  Front left/right center.. No
  Rear left/right center... No
  Rear LFE................. No


Mitsubish TV EDID
Code:
Monitor
  Model name............... MEUSPTV14
  Manufacturer............. Mitsubishi
  Plug and Play ID......... MEL31D5
  Serial number............ n/a
  Manufacture date......... 2011, ISO week 21
  Filter driver............ None
  -------------------------
  EDID revision............ 1.3
  Input signal type........ Digital
  Color bit depth.......... Undefined
  Display type............. RGB color
  Screen size.............. 2040 x 1150 mm
  Power management......... Active off/sleep
  Extension blocs.......... 1 (CEA-EXT)
  -------------------------
  DDC/CI................... Not supported

Color characteristics
  Default color space...... Non-sRGB
  Display gamma............ 2.20
  Red chromaticity......... Rx 0.669 - Ry 0.308
  Green chromaticity....... Gx 0.281 - Gy 0.668
  Blue chromaticity........ Bx 0.150 - By 0.059
  White point (default).... Wx 0.313 - Wy 0.329
  Additional descriptors... None

Timing characteristics
  Horizontal scan range.... 15-68kHz
  Vertical scan range...... 59-61Hz
  Video bandwidth.......... 230MHz
  CVT standard............. Not supported
  GTF standard............. Not supported
  Additional descriptors... None
  Preferred timing......... Yes
  Native/preferred timing.. 1920x1080p at 60Hz (16:9)
    Modeline............... "1920x1080" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
  Detailed timing #1....... 1920x1080p at 30Hz (16:9)
    Modeline............... "1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync

Standard timings supported
     640 x  480p at  60Hz - IBM VGA
     800 x  600p at  60Hz - VESA
    1024 x  768p at  60Hz - VESA
    1920 x 1080p at  60Hz - VESA STD
    1360 x  765p at  60Hz - VESA STD
    1280 x 1024p at  60Hz - VESA STD
    1280 x  720p at  60Hz - VESA STD

EIA/CEA-861 Information
  Revision number.......... 3
  IT underscan............. Supported
  Basic audio.............. Supported
  YCbCr 4:4:4.............. Supported
  YCbCr 4:2:2.............. Supported
  Native formats........... 1
  Detailed timing #1....... 1920x1080p at 24Hz (16:9)
    Modeline............... "1920x1080" 74.250 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
  Detailed timing #2....... 1920x1080i at 60Hz (16:9)
    Modeline............... "1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync
  Detailed timing #3....... 1280x720p at 60Hz (16:9)
    Modeline............... "1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
  Detailed timing #4....... 720x480p at 60Hz (16:9)
    Modeline............... "720x480" 27.000 720 736 798 858 480 489 495 525 -hsync -vsync

CE video identifiers (VICs) - timing/formats supported
    1920 x 1080p at  60Hz - HDTV (16:9, 1:1) [Native]
    1920 x 1080p at  30Hz - HDTV (16:9, 1:1)
    1920 x 1080p at  24Hz - HDTV (16:9, 1:1)
    1920 x 1080i at  60Hz - HDTV (16:9, 1:1)
    1280 x  720p at  60Hz - HDTV (16:9, 1:1)
     720 x  480p at  60Hz - EDTV (16:9, 32:27)
     720 x  480i at  60Hz - Doublescan (16:9, 32:27)
     640 x  480p at  60Hz - Default (4:3, 1:1)
    NB: NTSC refresh rate = (Hz*1000)/1001

CE audio data (formats supported)
  AC-3    6-channel,  640k max. bit rate at 32/44/48 kHz
  LPCM    2-channel, 16/20/24 bit depths at 32/44/48 kHz

CE speaker allocation data
  Channel configuration.... 2.0
  Front left/right......... Yes
  Front LFE................ No
  Front center............. No
  Rear left/right.......... No
  Rear center.............. No
  Front left/right center.. No
  Rear left/right center... No
  Rear LFE................. No

CE vendor specific data (VSDB)
  IEEE registration number. 0x000C03
  CEC physical address..... 3.0.0.0
  Supports AI (ACP, ISRC).. Yes
  Supports 48bpp........... No
  Supports 36bpp........... Yes
  Supports 30bpp........... Yes
  Supports YCbCr 4:4:4..... Yes
  Supports dual-link DVI... No
  Maximum TMDS clock....... 225MHz
  Video latency (p)........ 1ms
  Audio latency (p)........ 1ms
  Video latency (i)........ 1ms
  Audio latency (i)........ 1ms
  HDMI video capabilities.. Yes
  EDID screen size......... No additional info
  3D formats supported..... Not supported
  Data payload............. 030C003000B82DE001010101C8040140001F

CE colorimetry data
  xvYCC709 support......... No
  xvYCC601 support......... No
  sYCC601 support.......... No
  AdobeYCC601 support...... No
  AdobeRGB support......... No
  Metadata profile flags... 0x00

CE video capability data
  CE scan behavior......... Supports overscan and underscan
  IT scan behavior......... Supports overscan and underscan
  PT scan behavior......... Supports overscan and underscan
  RGB quantization range... Selectable (via AVI YQ)
  YCC quantization range... Not supported

Report information
  Date generated........... 4/18/2013
  Software revision........ 2.60.0.972
  Data source.............. Real-time 0x0021
  Operating system......... 6.1.7600.2

Raw data
  00,FF,FF,FF,FF,FF,FF,00,34,AC,D5,31,01,01,01,01,15,15,01,03,80,CC,73,78,2A,70,85,AB,4E,48,AB,26,
  0F,50,54,21,08,00,D1,C0,8B,C0,81,80,81,C0,01,01,01,01,01,01,01,01,02,3A,80,18,71,38,2D,40,58,2C,
  45,00,F5,7A,74,00,00,1E,01,1D,80,18,71,38,2D,40,58,2C,45,00,F5,7A,74,00,00,1E,00,00,00,FD,00,3B,
  3D,0F,44,17,00,0A,20,20,20,20,20,20,00,00,00,FC,00,4D,45,55,53,50,54,56,31,34,0A,20,20,20,01,91,
  02,03,32,F1,48,90,22,20,05,04,03,07,01,26,15,07,50,09,07,07,83,01,00,00,72,03,0C,00,30,00,B8,2D,
  E0,01,01,01,01,C8,04,01,40,00,1F,E3,05,00,00,E2,00,7F,01,1D,80,3E,73,38,2D,40,7E,2C,45,80,F5,7A,
  74,00,00,1E,01,1D,80,18,71,1C,16,20,58,2C,25,00,F5,7A,74,00,00,9E,01,1D,00,72,51,D0,1E,20,6E,28,
  55,00,F5,7A,74,00,00,1E,8C,0A,D0,8A,20,E0,2D,10,10,3E,96,00,F5,7A,74,00,00,18,00,00,00,00,00,A0

Adapter EDID
Code:
Monitor
  Model name............... CAT-6066
  Manufacturer............. CAT
  Plug and Play ID......... CAT6660
  Serial number............ n/a
  Manufacture date......... 2006, ISO week 50
  Filter driver............ None
  -------------------------
  EDID revision............ 1.3
  Input signal type........ Digital
  Color bit depth.......... Undefined
  Display type............. RGB color
  Screen size.............. 600 x 340 mm (27.2 in)
  Power management......... Active off/sleep
  Extension blocs.......... 1 (CEA-EXT)
  -------------------------
  DDC/CI................... Not supported

Color characteristics
  Default color space...... Non-sRGB
  Display gamma............ 2.20
  Red chromaticity......... Rx 0.652 - Ry 0.332
  Green chromaticity....... Gx 0.270 - Gy 0.589
  Blue chromaticity........ Bx 0.141 - By 0.068
  White point (default).... Wx 0.285 - Wy 0.293
  Additional descriptors... None

Timing characteristics
  Horizontal scan range.... 31-50kHz
  Vertical scan range...... 56-75Hz
  Video bandwidth.......... 80MHz
  CVT standard............. Not supported
  GTF standard............. Not supported
  Additional descriptors... None
  Preferred timing......... Yes
  Native/preferred timing.. 1920x1080i at 60Hz 
    Modeline............... "1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 interlace +hsync +vsync
  Detailed timing #1....... 720x480p at 60Hz 
    Modeline............... "720x480" 27.000 720 736 798 858 480 489 495 525 -hsync -vsync

Standard timings supported
     640 x  480p at  67Hz - Apple Mac II
     640 x  480p at  72Hz - VESA
     640 x  480p at  75Hz - VESA
     800 x  600p at  56Hz - VESA
     800 x  600p at  60Hz - VESA
     800 x  600p at  72Hz - VESA
     800 x  600p at  75Hz - VESA
    1024 x  768i at  87Hz - IBM
    1024 x  768p at  60Hz - VESA
    1024 x  768p at  70Hz - VESA
    1024 x  768p at  75Hz - VESA
    1280 x 1024p at  75Hz - VESA
     800 x  600p at  85Hz - VESA STD
    1600 x 1200p at  60Hz - VESA STD
    1280 x 1024p at  60Hz - VESA STD
     640 x  480p at  85Hz - VESA STD

EIA/CEA-861 Information
  Revision number.......... 3
  IT underscan............. Not supported
  Basic audio.............. Supported
  YCbCr 4:4:4.............. Supported
  YCbCr 4:2:2.............. Supported
  Native formats........... 1
  Detailed timing #1....... 1920x1080i at 50Hz 
    Modeline............... "1920x1080" 74.250 1920 2448 2492 2640 1080 1084 1094 1124 interlace +hsync +vsync
  Detailed timing #2....... 1440x480i at 60Hz 
    Modeline............... "1440x480" 27.000 1440 1478 1602 1716 480 488 494 524 interlace -hsync -vsync
  Detailed timing #3....... 1440x576i at 50Hz 
    Modeline............... "1440x576" 27.000 1440 1464 1590 1728 576 580 586 624 interlace -hsync -vsync
  Detailed timing #4....... 1280x720p at 60Hz 
    Modeline............... "1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync
  Detailed timing #5....... 1280x720p at 50Hz 
    Modeline............... "1280x720" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync

CE video identifiers (VICs) - timing/formats supported
    1920 x 1080i at  60Hz - HDTV (16:9, 1:1) [Native]
     720 x  480p at  60Hz - EDTV (4:3, 8:9)
     720 x  480p at  60Hz - EDTV (16:9, 32:27)
    1280 x  720p at  60Hz - HDTV (16:9, 1:1)
     640 x  480p at  60Hz - Default (4:3, 1:1)
     720 x  480i at  60Hz - Doublescan (4:3, 8:9)
     720 x  480i at  60Hz - Doublescan (16:9, 32:27)
     720 x  576p at  50Hz - EDTV (4:3, 16:15)
     720 x  576p at  50Hz - EDTV (16:9, 64:45)
    1280 x  720p at  50Hz - HDTV (16:9, 1:1)
    1920 x 1080i at  50Hz - HDTV (16:9, 1:1)
     720 x  576i at  50Hz - Doublescan (4:3, 16:15)
     720 x  576i at  50Hz - Doublescan (16:9, 64:45)
    1920 x 1080p at  60Hz - HDTV (16:9, 1:1)
    1920 x 1080p at  50Hz - HDTV (16:9, 1:1)
    NB: NTSC refresh rate = (Hz*1000)/1001

CE audio data (formats supported)
  LPCM    2-channel, 16/20/24 bit depths at 32/44/48 kHz

CE speaker allocation data
  Channel configuration.... 10.1
  Front left/right......... Yes
  Front LFE................ Yes
  Front center............. Yes
  Rear left/right.......... Yes
  Rear center.............. Yes
  Front left/right center.. Yes
  Rear left/right center... Yes
  Rear LFE................. No

CE vendor specific data (VSDB)
  IEEE registration number. 0x000C03
  CEC physical address..... 1.0.0.0
  Maximum TMDS clock....... 165MHz

Report information
  Date generated........... 4/18/2013
  Software revision........ 2.60.0.972
  Data source.............. Real-time 0x0051
  Operating system......... 6.1.7600.2

Raw data
  00,FF,FF,FF,FF,FF,FF,00,0C,34,60,66,00,00,00,00,32,10,01,03,80,3C,22,78,2A,03,20,A7,55,45,96,24,
  11,49,4B,1F,DF,00,45,59,A9,40,81,80,31,59,01,01,01,01,01,01,01,01,01,1D,80,18,71,1C,16,20,58,2C,
  25,00,5B,56,21,00,00,9E,8C,0A,D0,8A,20,E0,2D,10,10,3E,96,00,5B,56,21,00,00,18,00,00,00,FC,00,43,
  41,54,2D,36,30,36,36,0A,20,20,20,20,00,00,00,FD,00,38,4B,1F,32,08,00,0A,20,20,20,20,20,20,01,D1,
  02,03,22,71,4F,85,02,03,04,01,06,07,11,12,13,14,15,16,10,1F,23,09,07,07,83,7F,00,00,65,03,0C,00,
  10,00,01,1D,80,D0,72,1C,16,20,10,2C,25,80,5B,56,21,00,00,9E,8C,0A,A0,14,51,F0,16,00,26,7C,43,00,
  5B,56,21,00,00,98,8C,0A,A0,20,51,20,18,10,18,7E,23,00,5B,56,21,00,00,98,01,1D,00,72,51,D0,1E,20,
  6E,28,55,00,5B,56,21,00,00,1E,01,1D,00,BC,52,D0,1E,20,B8,28,55,40,5B,56,21,00,00,1E,00,00,00,2B
post #3537 of 3895
Thread Starter 
An EDID override only helps with detection, but you have to send a compressed audio stream anyway. For games you'll still need a DD live-encoding sound card.
post #3538 of 3895
So I have a DDL card currently. If I do "listen to" "what you hear" on my HDMI audio device. I still only get 2 channel sound. the rear channels get mixed into the front. I think this is because my TV says it only has 2 channels. I also have a problem that when I use AMD HD3D I lose sound because the TV is expecting AC3 audio only. I'm almost certain the EDID is the problem because Resident Evil 5 is a DD game, but it is only sending 2 channel DD audio. The TV is only telling windows it has 2 channels so windows only sends 2 channels. Movies are pre-encoded for 5.1 and windows just passes it along regardless of what the TV says. I know I'm not the expert on this, but I really would like to try changing the EDID to enable the other sound channels.

I have been doing some researching and it looks like I need to make this change
origiinal 2 channel stereo
Code:
Data payload............. 030C002000B82DE001010101C8040140001F

New 5.1 channel change
Code:
Data payload............. 030C002000B82DE00101010FC8040140001F

The problem is there is a 128th bit sum check and I dont know how to make that calculation. Any binary gurus that can help? If anyone else wants to try this, Its the 12th byte in the VSD which always starts with 030C00. Binary is as follows
Code:
bit 7: Reserved (0)
         bit 6: Rear Left Center / Rear Right Center present for 1, absent for 0
         bit 5: Front Left Center / Front Right Center present for 1, absent for 0
         bit 4: Rear Center present for 1, absent for 0
         bit 3: Rear Left / Rear Right present for 1, absent for 0
         bit 2: Front Center present for 1, absent for 0
         bit 1: LFE present for 1, absent for 0
         bit 0: Front Left / Front Right present for 1, absent for 0


How else would I make my setup work. I have seen the asus xonar card, but its 1.3 and I think I will have the same problem I had with the adapter.
Edited by Bailie2 - 4/18/13 at 12:02pm
post #3539 of 3895
Thread Starter 
OK, if the game is really sending a DD audio stream perhaps it could work. Here is your mod:

Mitsubishi WD-73840+6LPCM,AC3,DTS.zip 1k .zip file
post #3540 of 3895
^Thank you very much!
So yes this enabled 5.1 in windows options. It doesn't send AC3 6 channel audio. It will still pass DD 5.1.
I guess the problem with my system is now that I can't bitstream my sound card's SPDIF out port. So I feel like your file is a partial success. One problem might be that it looks like you enabled DTS which I can't use.

Looking at your file, it still says its only 2 channel
Code:
0x0C,0x00,0x30,0x00,0xB8,0x2D,0xE0,0x01,0x01,0x01,0x01,<----2 channel bit       0xC8,0x04,0x01,0x40,0x00,0x1F

I went in and changed my stock EDID to "0F and that also gave me the 5.1 option. DTS showed up too and I don't know why. I found my SADs
0x15,0x07,0x50 = AC-3 6-channel, 640k max. bit rate at 32/44/48 kHz
0x09,0x07,0x07 = LPCM 2-channel, 16/20/24 bit depths at 32/44/48 kHz
Just interesting to look through the code and understand it all. I wish I could make it all work.I guess I should have bought a different TV or Video Card.

I'm not sure what to do now. I'm going to monkey around with this some more. If anyone knows of a DDL bitstream card let me know.
Edited by Bailie2 - 4/18/13 at 2:05pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Home Theater Computers
AVS › AVS Forum › Video Components › Home Theater Computers › EDID Overrides to solve bitstreaming issues for ATI 5xxx's