Official KDL..EX500/501 Thread - Page 11

Originally Posted by cbaseuser

I had a w5100 for a while, and I keep hearing that the ex500 has better black levels. This is great and all, but are they on par with, let's say a panny 750b? I always hear a tv has "really good black levels", but when I go to the store, it always seems the panasonics are the darkest (and I am referring to all ccfl lit tv's for comparison).

I'm more of a sony fan than panasonic, and would prefer to get an ex500 series, and keep hearing that the black levels are "getting better". Are they as good as the 750b for those who have seen it in person? I have been looking everywhere for a ex500 on display, but there is no close who has it yet.

FWIW, A native contrast ratio is always more important to me than a dynamic or mega rating. How well can the set render good, solid black

ps...please don't ask me to "get a plasma"-can't stand the phosphor lag (plasma rainbows-yes, they exist)

Originally Posted by chinee

Panny 750? Or do you mean Samsung's 750? The Sammy 750s are really great TVs, not for everyone, but for those who love the (harsh, in my opinion) "pop" vs. the Sony's slightly softer picture.

All Panny's 42" and larger are plasma not LCD. So if you've been comparing at the store, you're either comparing 32 inchers, or 37's to 40's... not a really great comparo. But I truly think you've been comparing Sony to the Samsungs. If so, Sammy's glossy ultra clear panels allow their screens to provide that extra "pop" that's great for brightly lit retail stores. The higher the picture contrast setting (brighter the colors), the darker the blacks would appear.

I agree with you with the contrast ratios... native is always a better measure that the dynamic numbers. However, from my understanding, contrast ratios are really arbitrary measurements. Different manufacturers measure this characteristic differently, resulting in values that are inconsistent from one brand to another. Another marketing trick....

Originally Posted by cbaseuser

Sorry, yes I meant Samsung 750b (Heck, 650b even). Are the actual panels different? Is one known to be better than the other? I have always loved color on sonys. I have an eye one meter, and always do greyscale cal. on all my displays. I currently have an epson 6500 projector, which also has a full CMS.

I tried to live with a sony 52s5100 for a while, but the red flashing killed me. I WAS, however, able to get a beautiful white balance. Although full cms was not aval on the 52s5100, the color were close enough for me. There were clouding/flashlight issues, and the native black level left something to be desired.

I'm basically looking for a good replacement (done with projectors), but am also a big gamer, so a "quick" display would be nice. I heard someone say that the lag on this tv wasn't bad at all, especially with the game mode turned on. That's a huge plus.

I just hope that the "red flashing" issue doesn't creep up on this tv since it's using the Bravia 2 engine. I personally don't know if that was the sole culprit of the color flashing issues in previous sets or not. Let's hope not.

Originally Posted by Dan134

I have no idea what is up with this set.

I have been using it for the last 3 hours and for the life of me cannot see the bleed anymore. Turned off all the lights, etc. Last night it looked bad, but it looks amazingly uniform right now. I could see the bleed on the V5100 during the day, btw.

So weird. I have decided to just live with it. Its a great set with an incredible picture and a low price tag. I am not going to let "intermittent" bleed detract from my enjoyment.

Originally Posted by theheidis

Looks like Best Buy has free delivery, setup, and recycling again for any TV over 999.

Originally Posted by cbaseuser

This is great and all, but are they on par with, let's say a panny 750b? I always hear a tv has "really good black levels", but when I go to the store, it always seems the panasonics are the darkest (and I am referring to all ccfl lit tv's for comparison).

Originally Posted by 92miata

the reasons costco and sams club have "different numbers" in their models are so you can't take our sign to a RETAIL store and get a price match and vice versa. they are the same tv except for some cosmetic changes. once you are in the know, you should ALWAYS ALWAYS ALWAYS buy your tv's/electronics at costco. we simply have no competition on price/returns/warranty.

check on it yourself.....

Originally Posted by smiddleton5401

I'm not sure exactly how to describe this but in non HD programming I sometimes get a very small sliver of "empty" picture that looks like black and white fuzz or stripes about 2mm tall at the top of the picture. This only happens in old programs that are in SD and only while the TV is set to Full Pixel. When I choose normal or display newer or HD programs it isn't there.

It is not the source because I watched the same recorded show on my old 40" sammy before replacing it with the 501 yesterday.

Any thoughts?

Originally Posted by cbaseuser

I just hope that the "red flashing" issue doesn't creep up on this tv since it's using the Bravia 2 engine. I personally don't know if that was the sole culprit of the color flashing issues in previous sets or not. Let's hope not.

Originally Posted by smiddleton5401

I'm not sure exactly how to describe this but in non HD programming I sometimes get a very small sliver of "empty" picture that looks like black and white fuzz or stripes about 2mm tall at the top of the picture. This only happens in old programs that are in SD and only while the TV is set to Full Pixel. When I choose normal or display newer or HD programs it isn't there.

It is not the source because I watched the same recorded show on my old 40" sammy before replacing it with the 501 yesterday.

Any thoughts?

Originally Posted by cbaseuser

I'm basically looking for a good replacement (done with projectors), but am also a big gamer, so a "quick" display would be nice. I heard someone say that the lag on this tv wasn't bad at all, especially with the game mode turned on. That's a huge plus.

Originally Posted by chinee

Just returned from Best Buy and the EX500 and EX700 screens on display were disappointing in comparison to the Sammys and LGs surrounding them. I checked the settings and although it was set to Vivid, the PQ seemed overexposed, with grays instead of blacks and way too-soft colors. Just lowering the brightness and increasing the color level did wonders to improve the PQ. If Best Buy continues to display the Sonys like these, everyone's going to choose the Sammys.

Originally Posted by MikeJ927

Yeah the lag when gaming is not bad at all. I hooked my Xbox 360 up to my 40EX500 and played some Gears of War 2. I was surprised by how little lag there was and I didn't even have the game mode on just motionflow set to standard. Gears is extremely fast paced and all my shots were coming out great. The only way I even noticed the lag was when I would reload my weapon but it was only slightly off. I'm sure if I turned motionflow off that would help even more but I just love the look of it. I'll try it with game mode on tonight and get back to you.

Originally Posted by km23

That's great to hear. I think the only way to judge it is to try it at home. I have a Sony 46W3000 right now, (that I think looks great, but is too small for the room it is in) and I don't notice any lag at all. I find it odd that newer TVs would have this problem. I thought that thanks to technology that this wouldn't be the case. Is this an issue with newer TVs?

Originally Posted by Rob_Simpson

1st time poster, long time lurker. I just picked this set up on Saturday (kdl-55ex500) and was wondering if anyone had their sets calibrated yet and if so what settings they came up with. I've been toying with it but that happy medium is an elusive beast. Also I found that gaming is pretty much only usable on game mode. Even with it on there is the an ever so slight bit of lag but I'm not sure if this is because my xbox 360 is connected with component cables or a problem with the set itself. I can't test it with a hdmi cable because my console doesn't have the connector.

Originally Posted by km23

From the other posts, looks like there is lag with HDMI as well. That's really frustrating. Was going to pick this TV and now I don't know what to do. Did you have a TV before that had a lag or not?

Originally Posted by Rob_Simpson

1st time poster, long time lurker. I just picked this set up on Saturday (kdl-55ex500) and was wondering if anyone had their sets calibrated yet and if so what settings they came up with. ...

Originally Posted by belloq

I'm considering the KDL-32EX500. Does anyone know the following?:

1. What is the bit-depth of the panel? (Sony's site had this spec for last year's models but not for this year's)

2. Does it support true 24p? (meaning- when you turn off both cinemotion and motionflow and set your blu-ray player to 24p output, that the TV displays actual 24p or an exact multiple of 24p with no pulldown tricks or judder)

3. Does it have a 1:1 pixel mapping ("full pixel") mode?

Originally Posted by The Hawk

Just for the record:

I see a lot of people have issue with the "silver" bezel along the bottom. While I agree that all black is very nice the "silver" bezel is not objectionable in a normal viewing environment. In fact, the pics on the Sony site are misleading as it's not silver at all....it's gunmetal in color. It might seem bright under the harsh lights of a store because of the way the brushed finish of the bezel can pick up and reflect overhead lighting making it appear bright. In a room with a table top lamps though I find it barely noticeable unless I look for it.