Bar, Billiard, Theater Room (Basement) build/finish pics

After reading through a good deal of these threads and getting some good ideas if I were to do it again, I just wanted to share my "man cave" with you all in hopes that at the least it could give others some ideas or "ah hah" moments.

The room consists of a pool table area, theater area, and bar; completely unique right? Here's how it started, new home with an unfinished basement.
This is the view from standing in the pool table area, looking first into the theater area (middle) where the tv (sorry, no screen) will be placed in the niche on the right side, then on the far end of the room, the bar. The small room to the left is the sump pump room, which will be disguised as a wine cellar:


Still in the pool table area, looking at the theater niche:


In the bar looking the other way to the pool table area:

What are you talking about? I just saw your thread, looks great!

I did goof up the wording a bit, mine is after the fact also, just taking some time to find some of the pics... The tv is viewable from both ends, the niche won't be the greatest for front speaker placement (still have not done that), but it's a compromise I had to make for an "overall" room. I was trying like crazy to fit a 9' table, but that would have meant no theater.

The following 2 pics show a similar view from the first post - standing in the billiard area and looking toward the theater and bar:



So you'll notice that yes, if you are standing very near the tv wall, you won't be able to view the tv. The angles on the niche aren't very sharp, so you only have to move a foot or two away form the wall to see the picture.

I have installed a flexible, PVC like, hose that goes from the back wall of the niche to the far right back cabinet of the bar for components. I have run the usual HDMI, an IR repeater that sits behind the clear glass part of the tv bezel, and a subwoofer cable that would exit at floor level below the tv. Thought being that I would end up cutting/modifying a small to medium sized ottoman, place it inside there etc. I may just end up moving to a wireless subwoofer though for better placement, thoughts?

Thanks! Sorry, I was getting to the bar, but got busy!

First I wanted to show the seating area, typically the seats are arranged in an "X" pattern, though when we want to fit 4 for a movie we turn them all around and form a slightly curved seating area facing the picture (2 shown put together here):

It's fairly washed out with all the lights and flash on, but you all know how that goes. (52" also.)

On to the bar. Main shots:



Used a 2x6 wall for the bar; with only 1 adjoining wall, I believe anything smaller would not have been sturdy (in my case at least), it's nailed into the concrete.

Gotta go with the copper sink right?


Ice maker and fridge and apparently limes :


Wiring management what?


No speakers or components yet.

Back wall of the theater (am I allowed to call it that if I don't have a PJ?) area:

Soffit is for HVAC. The left rear surround is wired to the space in between the 2 doors on the right. Tough choice, but that's where it had to go. The other surround is wired to the other side of the hallway (actually in the billiard area). So now I bet you're wondering what the heck I'm using - yes, in-walls. I was really set on in-walls that have back-boxes but honestly, for the price of some cheap brand names without back boxes, I will try them first. Please don't kill me.

The door on the far right of the pic above is to the sump room:


Tasty sump pump:

Thanks all, I enjoy the comments.

Yes, the sump pump is underneath the barrel. I had to notch out the back and bottom of it as the pipes of course come up out of the pump and straight into the wall. One thing to keep in mind for any potential barrel users; since they will likely be dry for some time when you get it, the wood will have shrunk and become loose. The metal bands really only hold it together when the wood is wet and swollen. I had to pre-drill and screw about 100 screws into the bands before I could even think about cutting the notch.

Boy, I can't wait to retire and enjoy a nice bottle and, uh, a smoke...

They were ordered from Home Depot and are Kraft Maid brand. They pretty much are a modular design; you can order them by the cabinet. They of course come in all different shapes/sizes, so you just put them together to meet your dimensions and fill in either (or both) end that touches the wall with a filler piece of trim/wood.


Yeah, the circle of chairs is really great for conversation. Funny you ask, as I originally stated, I wanted in-walls with back-boxes; since the cost was a little high I ended up deciding to purchase them in stages and do it little by little. WAF (and mine) is at 0% right now since she has a potential lay-off coming. Right before we got the news I even decided to go with some inexpensive brand name in-walls with no back-boxes, but appropriately, that's on hold too. I'll try them first and if I don't like them, move up the chain.