AVS › AVS Forum › Display Devices › Plasma Flat Panel Displays › How to MASTER RESET Panasonic TC-P50V10
New Posts  All Forums:Forum Nav:

How to MASTER RESET Panasonic TC-P50V10

post #1 of 9
4/11/10 at 5:11pm
Thread Starter 
Hey guys i bought the demo unit of TC-P50V10

every few min the tv keeps going in to demo mode...

anyway to change that? i would much rather prefer to do a MASTER reset...

the reset to default setting only does the menu and picture settings

here's the page 16 of the manual...

but its not working... this is what ive done...

1) turned off the tv
2) pressed the power button n the tv
3) unplugged from the back of the TV set it while holding the POWER button
4) pluggin in the power cord while still holding the power button

NO USE

did the exact same thing again while releasing the power button while plugging in the power cable

what am i doing wrong?

Reply
Reply

AVS Top Picks

post #2 of 9
4/11/10 at 5:31pm
try this

menu button> setup> arrow up once > reset to default
Reply
Reply
post #3 of 9
4/11/10 at 5:57pm
Thread Starter 
this is the reset i was talking to you about in my initial post...

it only resets the picture settings... and stuff...

like as is i cant even access the "timer" option in menu with the "store" setting that its currently on
Reply
Reply
post #4 of 9
4/11/10 at 6:45pm
Quote:
Originally Posted by darshan_4 View Post

here's the page 16 of the manual...

but its not working... this is what ive done...

1) turned off the tv
2) pressed the power button on the tv
3) unplugged from the back of the TV set it while holding the POWER button
4) pluggin in the power cord while still holding the power button.

NO USE. did the exact same thing again while releasing the power button while plugging in the power cable. what am i doing wrong?

I don't think you're doing it exactly as the manual says to do it.

All you have to do is turn the TV on, then either press and hold the front Power button on the front of the TV for several seconds until it reboots, OR turn the TV on and simply unplug it for several seconds then plug it back in again. Both of these methods have worked to bring up the initial Viewing Environment menu on various Panasonics.
Reply
Reply
post #5 of 9
4/11/10 at 8:50pm
Thread Starter 
it worked!

thx ^^
Reply
Reply
post #6 of 9
4/12/10 at 7:14am
Quote:
Originally Posted by darshan_4 View Post

it worked!

thx ^^

Yay! Which method did you use?
Reply
Reply
post #7 of 9
4/12/10 at 9:32am
Thread Starter 
i pressed it and held it in place for more then 30 sec

while holding it i unplugged the tv and then let go of the power

i HEARD a click sound...

n then pluged it in after few second and voila
Reply
Reply
post #8 of 9
4/12/10 at 12:23pm
Quote:
Originally Posted by darshan_4 View Post

i pressed it and held it in place for more then 30 sec

while holding it i unplugged the tv and then let go of the power

i HEARD a click sound...

n then pluged it in after few second and voila

You still did it incorrectly then. You don't have to unplug it if you hold the power button in long enough; it will reboot all by itself. By unplugging it while holding the button in you just short-cutted the process so there was no need to hold the button in anyway.
Reply
Reply
post #9 of 9
4/15/10 at 1:08pm
Thread Starter 
hm... you're probbly right but the problem i was trying to fix was resolved...

which was to get rid of the demo screen that poped up every so often...
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Plasma Flat Panel Displays

AVS Top Picks

AVS › AVS Forum › Display Devices › Plasma Flat Panel Displays › How to MASTER RESET Panasonic TC-P50V10