Originally Posted by alandye
Does the TY-ST08K work with the TH-37PA20?
There is no documentation that says it fits the consumer model TH-37PA20 since it's made for the Pro models, but since it's physically the same as the silver PA20 stand i don't see why it wouldn't fit.
According to the TY-ST08K PDF manual i have, it fits the 37", 42", and 50" Pro model. It shows that you install the poles in a particular orientation (line up two arrows) to fit both the 42" and 50" display, but for the smaller 37" display you spin them 180 degrees so they attach to the crossbar using different holes (lining up two dots) than the holes used for the 42"/50" configuration. The poles are offset so in the 37" orientation the poles are a little closer together than in the 42"/50" orientation.
In the PDF manual i have for the TY-ST42PA20 stand, they use the exact same instructions and drawings for the pole attachment method. It should work the same on the TH-37PA20 since it's already been established that these two stands are physically identical aside from the trim colors, and are interchangeable on the Pro and Consumer models.
Screen Shot of the pole installation for both the TY-ST08K and TY-ST42PA20:
Panasonic TY-ST08K Picture of Pole Installation.JPG 107k .JPG file
__________________________________________Edited by RandyWalters - 7/2/13 at 6:42am