AVS › AVS Forum › Display Devices › Screens › Stewart flimscreen rigid rear projection screen
New Posts  All Forums:Forum Nav:

Stewart flimscreen rigid rear projection screen

post #1 of 3
6/19/10 at 6:19am
Thread Starter 
i have come across an opportunity to get a Stewart film rigid rear projection screen i dont know a lot about screens and im looking for information that will help me make a decision on what to do. here is the information i have

it is a 96" diagonal screen
screen: Graphite ST OD: 57-1/2" x 76-3/4"
model: wedge096vgps - 14

screen is brand new still crated from stewart and never been opened other then the top of the crate.
it was built about 2 years ago and never used.

i dont know what its worth how it would need to be set up or anything so any info will help thank you
Reply
Reply

AVS Top Picks

post #2 of 3
6/19/10 at 2:43pm
I think you'll need a pretty bright pj for that; check the gain spec.

Also it's probably meant to work with a short throw.

AVS had a .65X lens (will reduce a pj's throw by 1/3) in their clearance sale recently.
Reply
Reply
post #3 of 3
6/19/10 at 3:14pm
Quote:
Originally Posted by njschad View Post


it is a 96" diagonal screen
screen: Graphite ST OD: 57-1/2" x 76-3/4"
model: wedge096vgps - 14

i don't know what its worth how it would need to be set up or anything so any info will help thank you

Go to the Stewart site at:

http://www.stewartfilmscreen.com/res...sidential.html

Try to find out if it is a Graphite 70 or Graphite 100. Figure out if you have enough projector power to use it through Projector Central.

http://www.projectorcentral.com/

They are pretty expensive if you order them fresh, but buying a 2 year old model you should expect to pay much less, so bargain hard. If you can't use it, don't buy it.

IB
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Screens

AVS Top Picks

AVS › AVS Forum › Display Devices › Screens › Stewart flimscreen rigid rear projection screen