AVS › AVS Forum › 3D Central › 3D Source Components › Help with ps3 settings for best quality:
New Posts  All Forums:Forum Nav:

Help with ps3 settings for best quality:

post #1 of 6
Thread Starter 
Ok so I was looking on my PS3 trying to make sure all settings will be optimized for my Samsung ln46c750 tv. I am going to list the options that I have no clue what to do with and would appreciate it if you guys could give me suggestions!

Cross Color Reduction filter on/off
RGB Full Range (HDMI) full/limited
Y PB/Cb Pr/Cr Superwhite HDMI: On / Off
Deep Color ouput HDMI: Auto/off

In Video Settings: BD/DVD video output format HDMI : Auto/RGB/ Y Pb/Cb Pr/Cr

BD 1080P 24Hz Output HDMI: Auto/On/Off
Dynamic Range Control: Auto/On/Off
Audio Output Format: Bitsream Linear PCM ( will give HT model number below)
BD Audio Output Format Optical (I use optical) Bitstream Mix/Bitstream Direct/ Linear PCM
For a home theater I just use a budget Sony DAV-HDX277WC

And I have these options when outputting over optical can select multiple:

Dolby 5.1 Ch
DTS 5.1ch
AAC
LinearPCM 2ch 44.1khz (checked and greyed out)
LinearPCM 2ch 88.2 khz
LinearPCM 2ch 176.4 khz
linearPCM 2ch 48khz (checked and greyed out)

I know this is alot to ask but I am not sure of this stuff and you guys are experts! I want to make sure I am getting the best possible experience! Iam usign HDMI for video and Optical for audio since the TV won't pass the 5.1 to my HT over optical
post #2 of 6
See the PS3 thread here:

http://www.avsforum.com/avs-vb/showthread.php?t=931796

It will explain all the settings.
post #3 of 6
Thread Starter 
Thanks bud! Hopefully I can figure out how they all effect my particular TV!
post #4 of 6
Quote:
Originally Posted by 9646gt View Post

Ok so I was looking on my PS3 trying to make sure all settings will be optimized for my Samsung ln46c750 tv. I am going to list the options that I have no clue what to do with and would appreciate it if you guys could give me suggestions!

Cross Color Reduction filter on/off
RGB Full Range (HDMI) full/limited
Y PB/Cb Pr/Cr Superwhite HDMI: On / Off
Deep Color ouput HDMI: Auto/off

In Video Settings: BD/DVD video output format HDMI : Auto/RGB/ Y Pb/Cb Pr/Cr

BD 1080P 24Hz Output HDMI: Auto/On/Off
Dynamic Range Control: Auto/On/Off
Audio Output Format: Bitsream Linear PCM ( will give HT model number below)
BD Audio Output Format Optical (I use optical) Bitstream Mix/Bitstream Direct/ Linear PCM
For a home theater I just use a budget Sony DAV-HDX277WC

And I have these options when outputting over optical can select multiple:

Dolby 5.1 Ch
DTS 5.1ch
AAC
LinearPCM 2ch 44.1khz (checked and greyed out)
LinearPCM 2ch 88.2 khz
LinearPCM 2ch 176.4 khz
linearPCM 2ch 48khz (checked and greyed out)

I know this is alot to ask but I am not sure of this stuff and you guys are experts! I want to make sure I am getting the best possible experience! Iam usign HDMI for video and Optical for audio since the TV won't pass the 5.1 to my HT over optical

Settings shown in red above should work well with your setup.
post #5 of 6
Thread Starter 
Thanks so much! That will leave me with no doubts that it's set up right! Your awesome and thanks again!
post #6 of 6
You're welcome.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: 3D Source Components
AVS › AVS Forum › 3D Central › 3D Source Components › Help with ps3 settings for best quality: