or Connect
AVS › AVS Forum › Audio › Receivers, Amps, and Processors › The Official Integra DHC-80.2 Pre/Pro Thread
New Posts  All Forums:Forum Nav:

The Official Integra DHC-80.2 Pre/Pro Thread - Page 117

post #3481 of 3823
Quote:
Originally Posted by RapalloAV View Post


I'm trying to find that out too, I cant see it on their website but often it seems to be days after the announcement.

Enhances the quality of DTS sound tracks. The info is on the U.S Integra website as a PDF file.

http://63.148.251.135/redirect_servi...2_03_28_12.pdf
post #3482 of 3823
Quote:
Originally Posted by jmschnur View Post

What does it do?

Greetings,

The new firmware description says the following:

Quote:


The 03/28/2012 update addresses the following:
1. Improves noise during playback of DTS-HD Master Audio with particular Blu-ray disc

I would take this to mean that it specifically addresses playback issues with CERTAIN DTS-HD MA soundtracks.

Regards,
post #3483 of 3823
Quote:
Originally Posted by Ralph Potts View Post

Greetings,

The new firmware description says the following:



I would take this to mean that it specifically addresses playback issues with CERTAIN DTS-HD MA soundtracks.

Regards,

There was one disc reported recently that seemed to cause a lot of players some problems too - I think it was Hugo BICBW there. Might be the same issue. Pure speculation on my part though
post #3484 of 3823
Quote:
Originally Posted by kbarnes701 View Post

There was one disc reported recently that seemed to cause a lot of players some problems too - I think it was Hugo BICBW there. Might be the same issue. Pure speculation on my part though

Greetings,

Yes, the issue with Hugo was related to loading/playback but not the quality of the sound/DTS-HD MA track.

Regards,
post #3485 of 3823
Quote:
Originally Posted by Ralph Potts View Post

Greetings,

Yes, the issue with Hugo was related to loading/playback but not the quality of the sound/DTS-HD MA track.

Regards,

Ah right - thanks. Is this latest thing some sort of variation of the old 'DTS Bomb' then?
post #3486 of 3823
Quote:
Originally Posted by kbarnes701 View Post

Ah right - thanks. Is this latest thing some sort of variation of the old 'DTS Bomb' then?

Greetings,

Keith, it's hard to say as I didn't experience it with any DTS-HD Master Audio soundtracks I have heard.

Regards,
post #3487 of 3823
I am looking to buy a used Integra 80.2.

Does it support 3D and HDMI 1.4? If so, what are the advantages of the 80.3?

Thanks for the help.
post #3488 of 3823
Quote:
Originally Posted by Ralph Potts View Post

Greetings,

Keith, it's hard to say as I didn't experience it with any DTS-HD Master Audio soundtracks I have heard.

Regards,

Yeah but I can't imagine you listen to a lot of DTS-HD MA tracks do ya?!
post #3489 of 3823
Quote:
Originally Posted by moosik View Post

I am looking to buy a used Integra 80.2.

Does it support 3D and HDMI 1.4? If so, what are the advantages of the 80.3?

Thanks for the help.

I believe it's 1.3a, but it is 3D ready. Main thing with 80.3 is support of 4k.
post #3490 of 3823
According to the manual the 80.2 is hdmi 1.4a. From the manual

HDMI (Ver.1.4a with Audio Return Channel, 3D), Deep Color, x.v.Color*2, Lip Sync, DTS*3-HD Master Audio,
DTS-HD High Resolution Audio, Dolby TrueHD*4, Dolby Digital Plus, DSD and Multi-CH PCM
post #3491 of 3823
Quote:
Originally Posted by mitohobe View Post

I believe it's 1.3a, but it is 3D ready. Main thing with 80.3 is support of 4k.

FYI 4k "support" means it has a scaler in it that is capable of upscaling to 4k. Neither the 80.2 or 80.3 are currently capable of passing a 4k signal through to a projector. This is confirmed with my 80.2, HTPC and Sony vw1000. Another member in the Sony 1000 thread tried it with his 80.3 and got the same result. It only passes 1080p.

There are no other real differences between the .2 and .3 - just the scaler's top resolution, and brand.
post #3492 of 3823
Quote:
Originally Posted by Kris Deering View Post

Yeah but I can't imagine you listen to a lot of DTS-HD MA tracks do ya?!

Greetings,

Me Kris??? Naahh not tooooo mannnyyy

Regards,
post #3493 of 3823
mitohobe,
the 80.2 HDMI (Ver.1.4a with Audio Return Channel, 3D
post #3494 of 3823
Hey All

My 80.2 seems to be acting up. I want to verify that its behavior is wrong.


When I press the "Movie/TV" Listening mode the processor does not cycle logically through the possible modes for that selection. It seems to randomly select a mode with no rhyme or reason. It seems to skip through several modes and choose one randomly. The same thing happens when I select "Music" listening modes and "Game".

I would expect that the unit would cycle the same way through the possible modes for that tytpe of listening. When I choose "Music", it picks NRL THX Cinema for example... not a valid mode according to the manual. It takes about 10 or more button presses to eventually find the mode I want and it does not behave the same way each time.

Any thoughts? Is my unit defective? Or is does this happen to your units too?

thanks Randy
post #3495 of 3823
Quote:
Originally Posted by itauditor View Post

Hey All

My 80.2 seems to be acting up. I want to verify that its behavior is wrong.


When I press the "Movie/TV" Listening mode the processor does not cycle logically through the possible modes for that selection. It seems to randomly select a mode with no rhyme or reason. It seems to skip through several modes and choose one randomly. The same thing happens when I select "Music" listening modes and "Game".

I would expect that the unit would cycle the same way through the possible modes for that tytpe of listening. When I choose "Music", it picks NRL THX Cinema for example... not a valid mode according to the manual. It takes about 10 or more button presses to eventually find the mode I want and it does not behave the same way each time.

Any thoughts? Is my unit defective? Or is does this happen to your units too?

thanks Randy

What default modes have you set up for these inputs?
post #3496 of 3823
Quote:
Originally Posted by audioguy View Post


What default modes have you set up for these inputs?

May be defective. There is a thread about units showing this type of problem. You may need new ide connectors and board cleaning. Call the dealer you bought it from or integra service
official onkyo 270.......,failure thread.

They will ask you to do a full reset show try that first. It will be under warranty.
post #3497 of 3823
post #3498 of 3823
What are the differences between main out and sub out?

I set up my tv to use both if one starting to give problems. Recently main out tarting acting up (probably hdmi) and I started using sub out. Seems fine but wonde if there are differences?
post #3499 of 3823
Hey guys, anyone else having any issues trying to connect or better yet, even finding your Pre-Pro on the Integra app? I know some people are having issues, has there been any fixes or a work around by any chance?

I tried resetting router and everything and can't think of anything else.
post #3500 of 3823
Quote:
Originally Posted by e39mofo View Post

Hey guys, anyone else having any issues trying to connect or better yet, even finding your Pre-Pro on the Integra app? I know some people are having issues, has there been any fixes or a work around by any chance?

I tried resetting router and everything and can't think of anything else.

Oremote works fine with iPad
post #3501 of 3823
Quote:
Originally Posted by jmschnur View Post


Oremote works fine with iPad

Agreed. My equipment is in another room so i love the feedback (e.g. Volume level) this product provides. Now if i could find something this good for my Oppo!
post #3502 of 3823
Thanks guys, I didn't realize this one gave 2 way feedback. I will try it out tonight.

Cheers,
Vince
post #3503 of 3823
I'd like someone who has rear speakers (7.1 channel setup) and the Integra to do the following:

Go into Setup and tell the prepro you do NOT have a center channel.

Play a 5.1 DTS MA or multichannel PCM track with DPL IIx Movie engaged.

Do you hear sound from the rear speakers?
Edited by RobertR - 7/5/12 at 7:56pm
post #3504 of 3823
Quote:
Originally Posted by RobertR View Post

I'd like someone who has rear speakers (7.1 channel setup) and the Integra to do the following:
Go into Setup and tell the prepro you do NOT have a center channel.
Play a 5.1 DTS MA or multichannel PCM track with DPL IIx Movie engaged.
Do you hear sound from the rear speakers?

OK, As requested: Speaker Config 7.2, All listening Modes presets set to PL IIx Movie.  Oppo BDP-93>DHC-80.2 Setup>Speaker Setup>Speaker Config>Crossover Freq. = None. Title Used: Green Lantern 5.1 DTS MA
ALL Channels Active.

post #3505 of 3823
Quote:
Originally Posted by calentz View Post

OK, As requested: Speaker Config 7.2, All listening Modes presets set to PL IIx Movie.  Oppo BDP-93>DHC-80.2 Setup>Speaker Setup>Speaker Config>Crossover Freq. = None. Title Used: Green Lantern 5.1 DTS MA

ALL Channels Active.
Thanks Carl. When you said "Crossover Freq. = None", did you mean "Center Channel = None"?
post #3506 of 3823
Quote:
Originally Posted by RobertR View Post

Thanks Carl. When you said "Crossover Freq. = None", did you mean "Center Channel = None"?

 Yes, the field does not indicate what "Center = 60" means. I included the meaning, but omitted which channel. (I am using "60" for all the fields) Sorry.

post #3507 of 3823
A problem just started with my 80.2. When I turn everything on sometimes the 80.2 doesn't recognize the audio signal. In other words, the speaker boxes do not show up on the front panel and I have no audio. I have to turn the processor on and off, sometimes a couple of times and then it will recognize the source. It did this a couple of times with my OPPO BDP-95 when I tried to play a CD whether I was using the hdmi input or balanced inputs. Tonight it did it when I just turned on my Direct TV receiver. Has anyone experienced this type of problem?
Bob
post #3508 of 3823
Hey bslep, my unit has been doing the exact same thing. I also noticed that the network is not working when I have no audio.
post #3509 of 3823
Quote:
Originally Posted by luckyaudio View Post

Hey bslep, my unit has been doing the exact same thing. I also noticed that the network is not working when I have no audio.

Thanks for the reply luckyaudio. I wonder if the new 7/5/12 firmware release will resolve the issue since it is supposed to improve network compatibility?
post #3510 of 3823
I have the latest firmware installed and still have the same problems.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Receivers, Amps, and Processors
AVS › AVS Forum › Audio › Receivers, Amps, and Processors › The Official Integra DHC-80.2 Pre/Pro Thread