A little update on the theater. I just finished painting and laying the tile in the equipment room. I took a picture to post but it didn't come out so good so I will take another tomorrow. Today the electrician is hooking up the A/C systems on the house. The tile setters are working through the rest of the house setting tile and trim guy shows up tomorrow to start hanging doors. This friday the doors for the theater and equipment room should be delivered.....I cant wait to see them!
Although I am probably 3 or 4 weeks from installing the outlets and switches in the rest of the house we are going to go ahead and finish the electric in the equipment room this week.
This way I can start messing around in the equipment room when i have time.
I wondering if any of you guys have installed LED tread lights. Here is a picture of the stairs leading to the lower seating area in the theater. I have 2 conductor wires at each tread and then installed back to the equipment room near an outlet where I can install a transformer for the low voltage. I am going to have carpet in the theater room so I thought I might find a led tread light which will act as a corner for each step.
Also, I am working on the fiber optic dome which is to be the center piece of the ceiling. They drilled holes in the fiberglass dome to install the fibers. The fibers were glued to the back of the dome. Unfortunately where they penetrate on the inside there is a hole so I am filling each hole around each fiber penetration with filler and then sanding. I know I am suppose to cut the fibers off after the final painting but does anyone know how long to leave the fibers sticking out??