First of all, I hope this is the right place for this. I have a WD Live Plus that I absolutely LOVE! However, I'm getting annoyed at having to reset it every other day. I typically leave the video output setting to HDMI (auto) as I have it hooked up to an Onkyo SR-705 receiver which does not upconvert. HDMI out of the receiver to my Optoma EP719 projector which is 1080i/720p at 60hz, I believe.
The problem I'm having is that the WD Live doesn't seem to select the correct video output settings. The WD loading screen will display, then, nothing and I have to hit the reset button. I tried manually setting the video output to something like 1080i (50hz) or (60hz) to no avail. It will display fine for a few times, then the next day will have issues. I tried switching up with a couple of them with similar results. It's frustrating because then I have to go in and re-adjust all of my other settings as well.
I was going to post on the Western Digital forums, as they've been a good resource for info, but figured I'd start here first. Any thoughts?
The problem I'm having is that the WD Live doesn't seem to select the correct video output settings. The WD loading screen will display, then, nothing and I have to hit the reset button. I tried manually setting the video output to something like 1080i (50hz) or (60hz) to no avail. It will display fine for a few times, then the next day will have issues. I tried switching up with a couple of them with similar results. It's frustrating because then I have to go in and re-adjust all of my other settings as well.
I was going to post on the Western Digital forums, as they've been a good resource for info, but figured I'd start here first. Any thoughts?
