Harmony 1 one issue with my projector

Put in an additional power off command in the as follows.
Select the appropriate Activity
- Settings
- Review the settings for this Activity
- Yes, but I want to add more..
- Save on Additional Devices screen
- Next a couple of time to get to "Please review the actions for .."
- In the bottom half of the screen, select and additional activity for your Projector, and click Add
- Select Send this infrared Command, and in the drop down box select the appropriate Power Off
- Save, and update your remote

Actually, if you do it that way you would need to do it for each activity the projector is used in.

What you want to do is to go to that device in the software and run thru the wizard for that device. Eventually it will bring you to the power control for that device. It will ask if you have a power toggle or discrete power on and off. Most likely discrete is what you want, and then when the software asks which command is for on and which command is for you need to tell the software that your device requires more than one command to power off. An additional box will pop up when the screen refreshes and you will be able to add the additional off command.

The software will then update all the activities that device is used in.