I am looking to build a passive crossover for a double mid, & single tweet settup.( this is a MTM home speaker) Is there some good free web based software I can use to determine crossover components? or can someone possibly put one together for me ? This is gonna be an attempt @ a bargain settup build.
Peerless India W8-12T 12P 8" http://www.parts-express.com/pe/show...number=299-068
Specifications: *Power handling: 40 watts RMS/80 watts max *VCdia: 1" *Le: 1.93 mH *Impedance: 12 ohms *Re: 10.9 ohms *Frequency response: 40-3,500 Hz *Fs: 43 Hz *SPL: 91.5 dB 1W/1m *Vas: 2.7 cu. ft. *Qms: 2.57 *Qes: 0.72 *Qts: 0.56 *Xmax: 2 mm *Dimensions: Overall diameter 8", Cutout diameter 7-1/2", Depth 3-1/2".
Dayton DC28FST-8 1-1/8 http://www.parts-express.com/pe/show...number=275-078
Specifications: *Power handling: 50 watts RMS/75 watts max *VCdia: 1-1/8" *Impedance: 8 ohms *Re: 5.6 ohms *Frequency range: 1,600-20,000 Hz *Fs: 749 Hz *SPL: 89 dB 1W/1m *Dimensions: A: 4-5/16", 3-11/32" across flats, B: 3-1/8", C: 1-1/2"
Peerless India W8-12T 12P 8" http://www.parts-express.com/pe/show...number=299-068
Specifications: *Power handling: 40 watts RMS/80 watts max *VCdia: 1" *Le: 1.93 mH *Impedance: 12 ohms *Re: 10.9 ohms *Frequency response: 40-3,500 Hz *Fs: 43 Hz *SPL: 91.5 dB 1W/1m *Vas: 2.7 cu. ft. *Qms: 2.57 *Qes: 0.72 *Qts: 0.56 *Xmax: 2 mm *Dimensions: Overall diameter 8", Cutout diameter 7-1/2", Depth 3-1/2".
Dayton DC28FST-8 1-1/8 http://www.parts-express.com/pe/show...number=275-078
Specifications: *Power handling: 50 watts RMS/75 watts max *VCdia: 1-1/8" *Impedance: 8 ohms *Re: 5.6 ohms *Frequency range: 1,600-20,000 Hz *Fs: 749 Hz *SPL: 89 dB 1W/1m *Dimensions: A: 4-5/16", 3-11/32" across flats, B: 3-1/8", C: 1-1/2"
