AVS › AVS Forum › Display Devices › LCD Flat Panel Displays › Best heavy duty LCD wall mounts?
New Posts  All Forums:Forum Nav:

Best heavy duty LCD wall mounts?

post #1 of 11
2/9/11 at 6:19pm
Thread Starter 
Im just browsing and trying to put together a home theater setup. I will probably get the Samsung UN46C8000 46-Inch 1080p 3D 240 Hz LED HDTV for a bedroom and i would like to know what a good wall mount is (preferably tilting up down and maybe left right movement) What brands are the best quality (nice and solid). Also i want one with room to mount a wall socket in it.

Hope i posted this in the right spot.

Thanks in advance!
Reply
Reply

AVS Top Picks

post #2 of 11
2/9/11 at 7:26pm
To me, the amount of tilt/swivel one can do to a 46 incher is next to useless, assuming u want to wall-mount it like most people and at most a few inches of back clearance. What I am saying is, buy a cheap fixed mount and don't let them talk u into spending major$ for a hunk of metal.

Gold Plated TV Mounts.
Reply
Reply
post #3 of 11
2/9/11 at 7:33pm
www.monoprice.com super cheap
Reply
Reply
post #4 of 11
2/9/11 at 8:38pm
Thread Starter 
I think it will be going near the corner so i would like some tilting function. Is there any that extend out far enough that will give me enough radius to point toward the center of a 12x15 room? I was looking at the OmniMount UCLX-P Articulating Wall Mount for 42" to 63" Displays and the OMNIMOUNT UNIVERSAL CANTILEVER. I know they are expensive but i just want what works best
-------------------
l.[....].<- tv......l
l.....................l
l.....................l
l.....................l
l.....................l
l.....................l
l.....................l
l.....................l
-------------------
Reply
Reply
post #5 of 11
2/10/11 at 8:39am
Just bought this one from Monoprice for a 42" Vizio XVT. Well built, sturdy mount for about 25% of the cost. If you take a look at youtube and search for monoprice mounts you can see some installed

http://www.monoprice.com/products/pr...seq=1&format=2

Your wasting your money on those others.
Reply
Reply
post #6 of 11
2/10/11 at 11:40am
I have purchased two of monoprice $25 mounts... one for my 55" set and one for my 37" set. I lag bolt them to studs. I have one about 4.75' off the ground and the other about 3.5' off the ground, and they provide enough tilt to the primary viewing area.
Reply
Reply
post #7 of 11
2/10/11 at 5:23pm
I second/third the monoprice wall mounts good selection very well built. They have light weight all the way up to 300lb holding monsters with ability to pull away from way swivel both right and left and lock swivel up and down.. All are less than one hundred bucks....with awesome reviews
Reply
Reply
post #8 of 11
2/10/11 at 6:12pm
Thread Starter 
I was reading the customer reviews on monoprice website. Im looking at the ones that have the one (2 piece) extending arm because i will be mounting near a corner and i like the idea of being able to shift it over the corner as much as possible. From what ive read, there seems to be a sagging issue once the tv is hung. Do the arms flex?
Reply
Reply
post #9 of 11
2/10/11 at 7:49pm
At the bottom of this post are photos of my Monoprice mount able to be used in a corner. Mount is good for 110 lbs. I'm so impressed with the quality and yet for such a great price. I feel you can't go wrong with this mount for your HDTV.


http://www.avsforum.com/avs-vb/showthread.php?t=1311928
Reply
Reply
post #10 of 11
2/10/11 at 8:03pm
I've got a MonoPrice articulated mount because we have our TV in the corner. It cost about $300 less than the 'OmniMount UCLX-P Articulating Wall Mount for 42" to 63" Displays'...http://www.monoprice.com/products/pr...seq=1&format=2 and with a 47" Vizio didn't sag a bit.
Reply
Reply
post #11 of 11
2/10/11 at 8:13pm
This is the exact same mount I used on my 42" Vizio with the Vizio Soundbar attached to it in the link I posted. Perfect for a corner install and Rock Solid.

Quote:
Originally Posted by olyteddy View Post

I've got a MonoPrice articulated mount because we have our TV in the corner. It cost about $300 less than the 'OmniMount UCLX-P Articulating Wall Mount for 42" to 63" Displays'...http://www.monoprice.com/products/pr...seq=1&format=2 and with a 47" Vizio didn't sag a bit.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: LCD Flat Panel Displays

AVS Top Picks

AVS › AVS Forum › Display Devices › LCD Flat Panel Displays › Best heavy duty LCD wall mounts?