or Connect
AVS › AVS Forum › Audio › DIY Speakers and Subs › New Mach 5 Audio UXL info
New Posts  All Forums:Forum Nav:

New Mach 5 Audio UXL info - Page 3

post #61 of 752
Between Mark and Rob over at CSS... I will definitely go crazy.
post #62 of 752
Yes, one step forward, 0.75 steps back

As Nathan mentioned, our move to a new location set things back unfortunately. On top of this came updates to our coil winder, a new CNC turning center, etc. etc.

Out of ciaos comes order.

My target is to have parts turned and ready to go by the end of June. I should have specs up on the website by then.

Thanks for your patience.

Best,
Mark
post #63 of 752
Quote:
Originally Posted by mrogowski View Post

Yes, one step forward, 0.75 steps back

As Nathan mentioned, our move to a new location set things back unfortunately. On top of this came updates to our coil winder, a new CNC turning center, etc. etc.

Out of ciaos comes order.

My target is to have parts turned and ready to go by the end of June. I should have specs up on the website by then.

Thanks for your patience.

Best,
Mark

any news for those of us with the 21s? (or does this news include that too?)

Thanks

Matt
post #64 of 752
Still waiting on the parts Matt. I received an Email from the supplier last week apologizing for the delay. I will keep you informed on any updates.

Best,
Mark
post #65 of 752
Quote:
Originally Posted by mrogowski View Post

Still waiting on the parts Matt. I received an Email from the supplier last week apologizing for the delay. I will keep you informed on any updates.

Best,
Mark

okay, thanks for keeping us up to date.

Regards,

Matt
post #66 of 752
Hey I am really interested in getting one of these 18s. Id like to get in on a pre release special if there is one. Does anyone know if mark is taking orders yet? Is there a definitive price yet, introductory price? I plan on pairing it with my two AE 18" passives, how will this do? Will the passive be enough, I think I remember someone saying they had an 18" lms with two AE passives.

Dan
post #67 of 752
So how hard is it to make a Carbon Fibre 21" cone?

I know its not happening but I just wondered.
post #68 of 752
Should be an exciting summer for Canadians with these new drivers!
post #69 of 752
Thread Starter 
I just got an email from Mark saying that the new drivers should be ready in 1.5 weeks! I asked him for some numbers, so hopefully he will get back to me in the next day or 2 so we can start modeling!!!
post #70 of 752
Awesome!!

I know this is a subwoofer but how high do you think these subs can play to?
post #71 of 752
I definitely need to get a dust mask for the sawdust I'm going to be making... and I've got 2 ep2500's waiting for something to motivate
post #72 of 752
Are all of the 21's pre sold or are some still available?
post #73 of 752
Thread Starter 
Not sure about the 21's being all pre-sold but I think I'm going that route as well now
post #74 of 752
Quote:
Originally Posted by N8DOGG View Post

I just got an email from Mark saying that the new drivers should be ready in 1.5 weeks! I asked him for some numbers, so hopefully he will get back to me in the next day or 2 so we can start modeling!!!

I sure hope so! Curious to see how awesome they will be.

Will there be numbers for anything besides the 21, you know?
post #75 of 752
Is this for the 18 or the 21, i thought the 21 parts were still on the boat from china.

Matt
post #76 of 752
Thread Starter 
ya, the numbers will be for the 18's. Mark said the 21's should have the parts needed in 6 weeks. I will go have a peek and make my decision when he gets one built
post #77 of 752
Quote:
Originally Posted by Steve_Vai_rules View Post

i thought the 21 parts were still on the boat from china.

No, it was the 12 year old workers coming over to build them.
post #78 of 752
Quote:
Originally Posted by Danielson99 View Post

No, it was the 12 year old workers coming over to build them.

Was that really called for?
post #79 of 752
I planned on buying two more 21s after having my first pair built. I dont have alot of money like others and will have to wait and save. Mark said he can always make more of the same 21.

SO the initial order was a pre-order(300 deposit per 21) so Mark could see that enough people would actually be buying 21's. Mark said he can make more in the future also. Thats atleast my understanding. Lots of things change so who knows what the future will hold.
post #80 of 752
The carbon/paper hybrid paper cone and that tall surround look incredible. Coupled with the supposed performance of this 18, I can't wait to get a hold of one... Considering ordering my EP2000 now! Wish we had T&S's to play around with enclosure modeling
post #81 of 752
New Mach 5 Audio Pi-18, posted today.

http://www.istonline.ca/mach5_pi_18.html

Fs (Hz) 19.3

Re (Ohms) 3.2

Qes 0.33

Qms 9.29

Qts 0.32

Cms (mm/N) 0.118

Rms (kg/s) 7.49

Mms (grams) 573.5

BL (Tm) 25.93

VAS (L) 229.9

34mm Xmax

Sd (cm^2) \t1176.3

Lp (2.83v/1m) 92..9

1200 watts RMS power handling


WinISD driver file for anyone interested.

Attachment 221996

 

Mach 5 Audio Pi-18.zip 0.6875k . file
post #82 of 752
Thread Starter 
thats a beast!!
post #83 of 752
Quote:
Originally Posted by Ghani99 View Post

New Mach 5 Audio Pi-18, posted today.

http://www.istonline.ca/mach5_pi_18.html

Fs (Hz) 19.3

Re (Ohms) 3.2

Qes 0.33

Qms 9.29

Qts 0.32

Cms (mm/N) 0.118

Rms (kg/s) 7.49

Mms (grams) 573.5

BL (Tm) 25.93

VAS (L) 229.9

34mm Xmax

Sd (cm^2) 1176.3

Lp (2.83v/1m) 92..9

1200 watts RMS power handling

WinISD driver file for anyone interested.

attachment.php?attachmentid=221996

If it's priced right, it'll sell like crazy. Needs yo compete withe the inexpensive and efficient horn design offerings though. Or work well in a new, low knee horn design.
post #84 of 752
So will this be a decent replacement for a Maelstrom-X?
post #85 of 752
Looks quite nice, I'd love to see how it models in a huge TH

Depending on the price, I might just be able to make a pair of these happen in my HT... I do have a pair of EP2500's "sitting around".
post #86 of 752
4 of these and an FP14000 hmmm.
post #87 of 752
wonder how close the 21s will be?

Matt
post #88 of 752
Any info on the inductance linearity?
post #89 of 752
Oh my sweet Jesus!

Suuhhhweeeeeeeet!


Quote:
Originally Posted by gpmbc View Post

4 of these and an FP14000 hmmm.

Yeah. That's what I'm thinking.

Quote:
Originally Posted by Eternal Velocity View Post

Any info on the inductance linearity?

I'm looking for the rating, myself. This sure looks like an awesome driver. Any ballpark estimate on the price on one of these and availability?
post #90 of 752
Quote:
Originally Posted by Scott Simonian View Post

Any ballpark estimate on the price on one of these and availability?

x2
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: DIY Speakers and Subs
AVS › AVS Forum › Audio › DIY Speakers and Subs › New Mach 5 Audio UXL info